Discuss Water supply and drain cover query in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
276
Hi everyone,

Today a plumber came round to do carry urgent repairs in the kitchen but needed to turn off the mains water supply to the building since it is flats.
He went out to the front of the building and opened the water drain cover which is outside the front gate and on the pavement to locate the stop valve and shut the water supply off, however he was not able to locate it despite taking out quite a bit of debris and said he could only see a pipe but no valve.

  • Is this unheard of as should there be a valve and can the water company help with this?
  • Also I can turn off the water to my flat by turning off all the stop cocks and gate valve is this not sufficient enough or does the main water valve outside the building need to be turned off.
  • Will I need to pay for the water company to help with this?
  • I had my bathroom completely upgraded a few years but the mains wasn't turned off then or am I missing something?

I would appreciate any information or advice as I am at a loss what to do thank you.
 
It's the Water Co who should clear out the stop valve chamber and fix the valve if required.
And also identify where their stop valve is and if not found fit one.
Sometimes the stop valve location is lost, when pavements are realligned or resurfaced

None of that is chargeable.
 

Reply to Water supply and drain cover query in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Replies
6
Views
285
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
318
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
335
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
322
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
441

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock