Discuss What trade should get paid more ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

JTplumbingservices

Gas Engineer
Messages
234
Just been having a debate with my company owner about wages after finding out the joiner I work alongside earned more than me.
I have my Advanced plumber ticket and gas.
We carry various trades and have a big kitchen and bathroom renewal contract so our joiners are usually doing the kitchens.
He says he pays him more as they are more valuable to him than a plumber as it’s much harder to get a good joiner than a plumber.
I.M.O a joiner wage should be similar to a plumber wage, a plumber with gas should earn more..
Thoughts ???
 
If you feel your worth more. Then hand your notice in. Tricky game on both sides, if he needs you, and you are good , he will pay.
If your not! Then he won’t.
Other than that, go self employed. Everyone should at some point.
 
If you feel your worth more. Then hand your notice in. Tricky game on both sides, if he needs you, and you are good , he will pay.
If your not! Then he won’t.
Other than that, go self employed. Everyone should at some point.
He said he needs me but I could be replaced a lot easier than a joiner.. I don’t get why he values someone who fits a kitchen so highly but he does, anyway he gave me more money so that will keep me quiet for now
 
My cousin is a tiler and got offered a job 36 k a year on the books plus van that is more than the gas jobs here.
Some paint and dec jobs here are 28 k a year on the cards.

Problem here is that gas and plumbing is swamped so wages are down mid to low trade. Think most are 24 k to 32 k firm dependant and experience
 
Look how much Wicks or B&Q charge to fit a kitchen! I fitted a kitchen before and doing the worktops was a ball ache. Joiners need millions of tools also don’t forget!

Painting don’t seem like a bad trade, fresh new walls...slap it on, in and out ;)
 
Look how much Wicks or B&Q charge to fit a kitchen! I fitted a kitchen before and doing the worktops was a ball ache. Joiners need millions of tools also don’t forget!

Painting don’t seem like a bad trade, fresh new walls...slap it on, in and out ;)
Fitting a worktop is prettt simple for any half decent joiner.. they might have more expensive tools, wee need tools too plus have to pay for gas then reassessments every 5 years. A joiner could buy every tool he needs to fit a kitchen for the price of a good CPA analyser.
 
Think a big issue is that gas engineers have large outlays too. Public liability&indemnity insurance is expensive in comparison to someone who doesn't do wet/hot works (electrician insurances is approx an 1/8th of the cost of gas engineers for same level of cover if using niceic recommended firm).

Cost of fga's, calibration costs every year. Gas safe registration, acs test every 5 years, ongoing training costs as technology changes.

Joinery is generally using same techniques that have been used for decades, though sometimes using a tool that speeds up and makes the process easier.

Insurance is cheaper, no qualifications/registrations required.

Public are blind to costs though when it comes to visual appearance work (e.g. Fancy new kitchen) than compared to replacing a boiler that has been limping and banging along for the last 20+years.

Ive been to hundreds of houses where they wanted smart thermostat fitted and have remote control lighting etc... .but the boiler they had was over 20 years old and had a very expensive kitchen just fitted around it o_O

Unless shiny pipes and Boilers become fashionable for the general public then it's gonna remain difficult with pay. The saying from customers I hear the most is "if its broken, don't fix it" .... Most often from visits where they have called in for a breakdown in the first place... And normally as they've just replaced the 3 year old car they had with a brand new one :rolleyes:

Rant worthy subject if there ever was one :p
 
Similar situation to me mate. My company paid for my gas. Signed a 3 year contract, 1 year to go in April.

The fact that your boss paid for your gas is no reason to not pay you accordingly, but just because you have your gas quals, doesn't entitle you to more money either.

It depends on the type of company you work for and what profit your bringing the firm compared to the joiner your comparing your wages too.

To be honest I've just had a similar argument with my boss regarding wages and to be fair, he has listened, given me a new role, more money, and a review in 6 months to see if I warrant another rise. The threat of me going self employed seemed to work :D
 
Similar situation to me mate. My company paid for my gas. Signed a 3 year contract, 1 year to go in April.

The fact that your boss paid for your gas is no reason to not pay you accordingly, but just because you have your gas quals, doesn't entitle you to more money either.

It depends on the type of company you work for and what profit your bringing the firm compared to the joiner your comparing your wages too.

To be honest I've just had a similar argument with my boss regarding wages and to be fair, he has listened, given me a new role, more money, and a review in 6 months to see if I warrant another rise. The threat of me going self employed seemed to work :D
We’re doing probably 3 kitchens a week on average all of which have to be fully repiped and the existing gas cooker pipe moved or one put in if there isn’t one, and each of these jobs gets a full new bathroom suite and repipe so he defo needs plumbers, but his argument is he can replace a plumber much easier than a joiner somehow so they get a “premium”. I asked for a raise and he said he couldn’t match what I asked for but offered me just above the half way mark between what I was on and what I wanted, I txt him again today though saying actually I want more and he replied saying ok and he will see me next week :p
 
Stick to your guns mate. Keep pushing until he says no. He may say to you I can replace you easily, it doesn't mean he believes it. Every boss in the world will have an excuse why he can't give someone a pay rise. I take it you are on the books? Out of curiosity, where are you based and what is he paying you compared to what you want, and what are the joiners on? Obviously you don't have to answer if you don't want to.
 

Reply to What trade should get paid more ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top