Search the forum,

Wiring hive

Post new thread

Discuss Wiring hive in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
hammers4spanner

hammers4spanner

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
7,712
Got a boiler change tomorrow and it has Hive smart controls , they easy to wire in and set up on a worcester ?
Got naff all experience with hive
 
Mains LNE into the "230V in" connection terminals in boiler
Remove link from L in "230V out" and LR with the radiator icon in the boiler
Connect L and N from "230V out" to the Hive L and N
Link L and Common in Hive
Connect terminal 3 on Hive to LR with the radiator icon in the boiler
 
Status
Not open for further replies.

Reply to Wiring hive in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
147
Lou
Lou
D
UK Can't get stopcock 100% closed to allow a tap repair
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
254
Chuck
C
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
248
oz-plumber
O
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
274
oz-plumber
O
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
223
PSxxxxxx
P
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Forum
UK Tiling Forum
Tiling Tools
Tiling Forums UK
Tiling Tools
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock