Wiring hive

Post new thread

Discuss Wiring hive in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
hammers4spanner

hammers4spanner

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
7,711
Got a boiler change tomorrow and it has Hive smart controls , they easy to wire in and set up on a worcester ?
Got naff all experience with hive
 
Mains LNE into the "230V in" connection terminals in boiler
Remove link from L in "230V out" and LR with the radiator icon in the boiler
Connect L and N from "230V out" to the Hive L and N
Link L and Common in Hive
Connect terminal 3 on Hive to LR with the radiator icon in the boiler
 
Status
Not open for further replies.

Reply to Wiring hive in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
232
Lou
Lou
D
UK Can't get stopcock 100% closed to allow a tap repair
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for...
Replies
1
Views
316
Chuck
C
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
297
oz-plumber
O
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
336
oz-plumber
O
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
301
PSxxxxxx
P

Newest Plumbing Threads

Back
Top