Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Worried customer.. please help in the USA area at PlumbersForums.net

Messages
2
advice please... would you use screws in a tanked wet room to fix batten to wall to tile ?
help appreciated please, I don’t want problems when it’s all tiled!

6D675203-2878-4FD0-B375-37EC5510EBAC.jpeg
CC77C31D-BB75-4407-A2BD-4FF58B003301.jpeg
 
I wouldnt but seen plenty that do as long as the screw holes are repaired and tanking patched up should be ok i would have completed the floor tiling before fitting the bottom row of tile on the wall you have some one way some the other ? Kop
 

Reply to Worried customer.. please help in the USA area at PlumbersForums.net

Similar plumbing topics

Good morning! First post looking for advice on an issue I am having with a bath installation. Although I have installed many baths before, mainly...
Replies
4
Views
571
S
Hi, hope all is well! I’ve fitted a compression cap on two of my shower mixer copper pipes (15mm). One of them has scratches and burring and is...
Replies
1
Views
412
Hi everyone, I'm hoping to get some advice on an issue I'm having with my Vaillant Ecotec Pro 24 boiler (R1 PCB). It was installed in 2013 and has...
Replies
1
Views
206
Morning everyone, if anyone could please offer advice on this issue it would help me with a massive issue regarding the water supply in my flat...
Replies
6
Views
624
M
Hi all Moved in to a new house a few months ago. The previous owner had installed an accessible wetroom with nonslip flooring, handrails, etc...
Replies
5
Views
483
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock