Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Worried customer.. please help in the USA area at PlumbersForums.net

Messages
2
advice please... would you use screws in a tanked wet room to fix batten to wall to tile ?
help appreciated please, I don’t want problems when it’s all tiled!

6D675203-2878-4FD0-B375-37EC5510EBAC.jpeg
CC77C31D-BB75-4407-A2BD-4FF58B003301.jpeg
 
I wouldnt but seen plenty that do as long as the screw holes are repaired and tanking patched up should be ok i would have completed the floor tiling before fitting the bottom row of tile on the wall you have some one way some the other ? Kop
 

Reply to Worried customer.. please help in the USA area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
215
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
388
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler...
Replies
1
Views
187
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
213
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
434
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock