Testo 327-1 replacement sensors

[MikeJhn]

Where is the best/cheapest place to buy replacement sensors for a Testo 327-1 FGA.

 

[ShaunCorbs]

sorry to say testo direct normally around 3-400 for the full lot or they normally offer you an upgrade discount eg trade in your old fga

 

[MikeJhn]

The 327-1 is a basic machine, not the all singing and dancing FGA it only has two replaceable sensors, CO which I can get for about £70.00 and O2 available for about £150.00, I just wondered if there are place's that offer them at a cheaper price.

 

[ShaunCorbs]

The 327-1 is a basic machine, not the all singing and dancing FGA it only has two replaceable sensors, CO which I can get for about £70.00 and O2 available for about £150.00, I just wondered if there are place's that offer them at a cheaper price.

Where do you send it for calibration?

 

[MikeJhn]

In touch with your female side? answering a question with a question LOL.

 

[Best]

Is there not a fixed price repair and calibrate for Testo? (If sent to Testo UK)

 

[ShaunCorbs]

Is there not a fixed price repair and calibrate for Testo? (If sent to Testo UK)

I think it's 2010 or younger nothing older

 

[ShaunCorbs]

In touch with your female side? answering a question with a question LOL.

Well ?? Who do you send it to for calibration

3-400 I think is cheap with labour and a calibration

As you've said the cells alone are 220

 

[MikeJhn]

What difference does it make who I send it too, the question was does anyone know where the replaceable sensors can be bought for a cheaper price?

 

[ShaunCorbs]

What difference does it make who I send it too, the question was does anyone know where the replaceable sensors can be bought for a cheaper price?

Because if it's testo they will refuse to calibrate it if it's not there parts

 

[MikeJhn]

I didn't think after market parts where available, can you provide a link?

 

[ShaunCorbs]

I didn't think after market parts where available, can you provide a link?

have a look on ebay theres a few

how do you know the ones your getting are original testo ones?

 

[MikeJhn]

I have looked on e-bay and they are not cheaper, so whether they are original Testo or not is a moot point, but they are from a Testo service centre in Germany.

 

[island fling]

I have recently sent both of ours back to Testo, £320 for new sensors, cells & calibration then posted back to my door in 3 days. Brilliant service.

 

[MikeJhn]

£320 for both or each? Unfortunately my FGA is pre 2011 so the fixed charge does not apply, however JMW will do it for £388.20, but since retirement I only service two units a year and am trying to cut down this cost.

 

[Old Account]

What difference does it make who I send it too, the question was does anyone know where the replaceable sensors can be bought for a cheaper price?

You being cheeky, if you want some help pay attention to attitude and politeness otherwise you won’t be lucky on here.

 

[MikeJhn]

I do understand the need for Politeness, but it seems that most contributors ask questions rather than answer the question posed, this seems to be a theme with any question asked on this Forum, no one answers a question directly.

 

[Old Account]

£320 for both or each? Unfortunately my FGA is pre 2011 so the fixed charge does not apply, however JMW will do it for £388.20, but since retirement I only service two units a year and am trying to cut down this cost.

Are you still registered?

 

[Old Account]

I do understand the need for Politeness, but it seems that most contributors ask questions rather than answer the question posed, this seems to be a theme with any question asked on this Forum, no one answers a question directly.

That’s not quite true. People on here are very careful on what informations they give further to an open forum. All they do is feel responsible for giving informations further on an open forum. You have to understand people come on here to ask for designing their systems and wanting to know how to fix their gas boilers, or cookers. It is somehow our responsibility to give gas related informations further to engineers who can proof their registration by supplying the mods the relevant details. Don’t get that all in the wrong throat it is just our way of getting the background knowledge before giving any kind of informations further. I hope you understand what I mean.

 

[MikeJhn]

I do understand what you mean, but a simple question as asked on this thread seems to have elicited a number of irrelevant questions that have no bearing on the subject in hand, I am not asking for anyone to design anything, just answer a basic question of where, or if discounts are available for FGA sensors, if the answer is no then that is the answer than anyone could have given, it seems that most have a hidden agenda of some kind that I do not understand.