Baxi 600 range of combis

[king of pipes]

Finally got round to fitting one of these today Halstead ace out and Baxi 630 in , first impressions is not good, no jig ,new filling link is a faf to fit and s- ite design, commissioning it is a ball ache 7 minutes purge cycle not a lot of good when the fur kin pump is siezed grrr , so Soded off first job back after 2 weeks off had to leave it switched off until tomorrow , didn't have the patience to start pulling the pump out of a brand new boiler at 5. 30pm ,- really hope these dont perform like the intecs they do look similar inside this I why I left it so long . Sorry chaps rant over

 

[ShaunCorbs]

get baxi out phone up on the works number tomorrow and they will be there Thursdays

you tried manually giving it a spin via the slot?

 

[ShaunCorbs]

did you notice the baxi filling loop is the same as the worcesters 😀

tbh i never use / fit on board filling loops find there too much hassle and the customer cant top them up / has problems with them

 

[king of pipes]

Yes mate will pull it out just didn't have the heart tonight Shaun . Cheers

 

[ShaunCorbs]

Yes mate will pull it out just didn't have the heart tonight Shaun . Cheers

just gets too late sometimes and your f off just want to go home

 

[Harvest Fields]

did you notice the baxi filling loop is the same as the worcesters 😀

tbh i never use / fit on board filling loops find there too much hassle and the customer cant top them up / has problems with them

I have, but didn’t want to say anything 😛😀

 

[Harvest Fields]

I drained a Worcester down today to fit a new rad. Took me 20 minutes to top the pressure up with it.

 

[ShaunCorbs]

I have, but didn’t want to say anything 😛😀

only reason i say i once got one that was Worcester stamped felt wrong puting it on 😀

 

[Harvest Fields]

only reason i say i once got one that was Worcester stamped felt wrong puting it on 😀

I got one for you. Customer choose a Nabis bar mixer from Part Centre. I order it, go and collect it, take it out of a sealed box. Has Bristan stamped all over it. Customer was well happy. 😛😀😀

 

[Burger]

Looks like a tall version of neta-tec - one carp boiler 😕😕

 

[Scott_D]

Did you complete the purge cycle?
I read they don’t work until it’s complete

 

[ShaunCorbs]

Did you complete the purge cycle?
I read they don’t work until it’s complete

correct

 

[king of pipes]

In a fashion Scott i was getting on with other stuff while it was doing it got the various codes needed then hey presto pump goosed I'm guessing it wouldn't reset as to much tempreture rise . Cheers kop

 

[ShaunCorbs]

I got one for you. Customer choose a Nabis bar mixer from Part Centre. I order it, go and collect it, take it out of a sealed box. Has Bristan stamped all over it. Customer was well happy. 😛😀😀

yep same with city i flow range made by bristan

 

[Scott_D]

In a fashion Scott i was getting on with other stuff while it was doing it got the various codes needed then hey presto pump goosed I'm guessing . Cheers kop

And the reset buttons don’t engage properly so you are pushing but nothing is happening

 

[king of pipes]

And the reset buttons don’t engage properly so you are pushing but nothing is happening

Yes mate just blinking that fault code wont reset my thinking is until pumps up and running it not sensing any flow through heat ex time will tell .

 

[Scott_D]

Yes mate just blinking that fault code wont reset my thinking is until pumps up and running it not sensing any flow through heat ex time will tell .

Could be something simple like not resetting
@ShaunCorbs might know how to fix

 

[king of pipes]

Maybe ?????

 

[ShaunCorbs]

125 is low flow and grund had / have a bad batch of pumps sticking nornmally manually turn them / spin to free them then book the job in

 

[Harvest Fields]

125 is low flow and grund had / have a bad batch of pumps sticking nornmally manually turn them / spin to free them then book the job in

We were told this by a rep on a course I did the other month.