A
Associate
Without ripping floors up it sounds like there's piping issues, maybe radiators fitted in series, God know's why? OR you have some serious circulation issues (less likely or improbable)!
Are you sure they worked fine before hand? If so then I'd be wondering what the installer has done since to bring about such a change in the system?
Yes, all the radiators worked perfectly well before. The new installation included 2 Primaries - separating the Heating and Hot water control. To do this, they ran about 24 meters of 22mm copper pipe from the ground floor kitchen boiler, through the ground floor hallway, then up to the 2nd (top floor) Airing cupboard, where the Cylinder is. (This is what they told me they would do anyway!).
They didn't touch the bedroom radiator we are having problems with now. They only took off the TRV and replaced it with a Lockshield on the hallway radiator.
We are only having these issues with these 2 radiators. I don't know if this is relevant, but the ground floor hallway radiator and the first floor bedroom radiator, as well as being on different floors, are located on opposite sides of each other. So the hallway radiator isn't directly below this bedroom radiator.
I can't say the installers were the most competent or professional, but I'm also wondering what they could have done to cause this, because we definitely did not have these issues before.....
Last edited by a moderator: