HALL of LEGENDS photo gallery.

[AlexGas]

All done, should get paid tomorrow. Another Logic is on the wall, supplied by the best plumbing merchant on the south coast - Williams & Co Ltd.

 

[AlexGas]

Thanks to the Belgrave crew.

 

[gassafe]

Don't normally do sanitary

How much extra do you charge to lay a dust sheet? 😉

 

[Ermintrude]

Don't do dust sheets.

 

[gassafe]

Don't do dust sheets.

Really? I wouldn't be allowed in a lot of houses without them lol!

 

[AlexGas]

Another happy customer...

 

[lame plumber]

fairly stunning bit of trigonometry

 

[jaydebruyne]

OK, hit me! Nearly done... It’s all about the cable, will do it tomorrow…

View attachment 22437

Is that a small pressure vessel on the cold in? Didn't know you could do that....

 

[kay-jay]

Is that a small pressure vessel on the cold in? Didn't know you could do that....

You should if there's a water meter or your fitting a boiler with plastic block. Worcestors need em

 

[jaydebruyne]

You should if there's a water meter or your fitting a boiler with plastic block. Worcestors need em

Plastic block?

 

[kay-jay]

Plastic block?

Water section manifold. Glowworm call it the sanitary block often referred to as the hydroblock or similar. Worcestors are plastic nowadays as are Glowworm and I beleive the new logics. Without the mini expansion vessel the plastic tends to warp/split and **** water out everywhere.

 

[jaydebruyne]

Water section manifold. Glowworm call it the sanitary block often referred to as the hydroblock or similar. Worcestors are plastic nowadays as are Glowworm and I beleive the new logics. Without the mini expansion vessel the plastic tends to warp/split and **** water out everywhere.

The filling loop?

 

[kay-jay]

The filling loop?

Nope. The whole water section of the boiler. Combis

 

[kay-jay]

http://www.keeptheheaton.com/produc...le_landing=1&gclid=CP7S6c3FpMcCFcPKtAodGtsB1Q

 

[jaydebruyne]

Nope. The whole water section of the boiler. Combis

Oh ok... Weird as my firm mainly fit Worcesters and I've never seen the pressure vessel being fitted... Will have to do some research.. Cheers kay-jay

 

[jaydebruyne]

http://www.keeptheheaton.com/produc...le_landing=1&gclid=CP7S6c3FpMcCFcPKtAodGtsB1Q

Ohhhh gotchya!!! Cheers mate.

 

[Gray0689]

That's a shock arrester

 

[Ch4 plumbing]

Another happy customer...

View attachment 22496

Looks great Alex very neat but the shower valve is horrendous! Shame they didn't want a new one.

 

[AlexGas]

Looks great Alex very neat but the shower valve is horrendous! Shame they didn't want a new one.

It's a good old MIRA mixer, still works fine. A customer is always right...

 

[Ermintrude]

Really? I wouldn't be allowed in a lot of houses without them lol!

Working for mates on a building site . Most of the mess was his. It was scarcasm. I have very good sheets runners mats and adhesive protection.