HALL of SHAME PHOTo`s

[newcastle phill]

Man that is a beauty.
Here is an average customers car round here

 

[Howsie]

WTF is that monstrosity

UFH manifold...

 

[Atouchofgas]

Meant to be

 

[Billy Bob Bob]

clearly fitted by a special sort of person

 

[Alex Knight]

Some from the last couple of weeks

Also had a cylinder that had been connected to mains water pressure bypassing the tank in the loft.

Plus a flexicom with no condense connected that had been leaking for a good while under kitchen units

 

[Mr Wilson]

best thread ever... took me 2 days to look at all the posts but well worth it .

:clap:

 

[Mr Wilson]

best thread ever... took me 2 days to look at all the posts but well worth it .

:clap:


sorry seeing double

 

[Best]

Here is a condensing pipe on a Grant oil boiler done by idiots. Note they obviously threw the plastic connector away and used a brass compression bend. I have fitted a PRV and a manual vent on boiler. Wouldn't be safe if someone turned the two gatevalves off!

 

[ShaunCorbs]

 

[Paulplumb]

You were quick off the mark there Shaun. I edited my post to er sanitise it but the quote reveals all 🙂 Could a friendly admin please edit? Many thanks

 

[Billy Bob Bob]

You were quick off the mark there Shaun. I edited my post to er sanitise it but the quote reveals all 🙂 Could a friendly admin please edit? Many thanks

sorted

 

[newcastle phill]

I bet you drew those cock and balls shaun ??

 

[Koogatubac]

Installed less than a month ago!

 

[WaterTight]

 

[1Steven]

Called to this job, wasn't working properly!

 

[1Steven]

Screw driver keeping the electrics on.

 

[chris watkins]

View attachment 25641

Called to this job, wasn't working properly!

Go on then apart from no pipe insulations whats wrong ?

 

[ShaunCorbs]

View attachment 25642
Screw driver keeping the electrics on.

😀 nice restriction on the filters

 

[1Steven]

Yes Shaun that's why he is my exboss! Quote it will be alright! :death:

 

[1Steven]

Go on then apart from no pipe insulations whats wrong ?

Look at the pipework off the cylinder. Pic is a bit small.

 

[macackau]

Look at the pipework off the cylinder. Pic is a bit small.

Lack of open vent?

 

[ShaunCorbs]

Lack of open vent?

piped the wrong way round i think

 

[ShaunCorbs]

Yes Shaun that's why he is my exboss! Quote it will be alright! :death:

hope its not a wet area also 😀

what do the contractors supply?

 

[chris watkins]

View attachment 25641

Called to this job, wasn't working properly!

Isn't it a Warix? if so it is piped correctly.

 

[tolly]

yep, warix is the other way round to surrey flanges.

 

[tolly]

the brass comp elbow gives away the fact its a warix, so it is piped up the right way round

 

[1Steven]

Isn't it a Warix? if so it is piped correctly.
View attachment 25649View attachment 25650

Well another school day, Thankyou for pointing this out. It's what I like about this forum, your never to old to learn.

 

[Crinkmeister]

As a mere amateur, can you educate me about what is special about a Warix please?

 

[plumben]

As a mere amateur, can you educate me about what is special about a Warix please?

I'd surgest you start a new thread in the plumbing section of this forum as your more likely to get a better response from other users Plumbing Forum

 

[gpbeck]

Sorry can't link image

 

[SimonG]

Couldnt miss this one 🙂

 

[Riley]

This was the solution to a wrongly installed flue that I raised a couple of months back

 

[rpm]

View attachment 25698

Couldnt miss this one 🙂

Nasty crack you`ve got there Simon.

 

[Clint 1979]

Found this work of art in Croydon yesterday......hmmmm

 

[Clint 1979]

Sorry don't know how to turn the pic