Worcester junior 28i (non condense)

[ShaunCorbs]

Loud banging within the heat exchanger so far...
And that stands as.
Still need them present to ask about the hot water outlet and colour

and how does that mean its unsafe ?

 

[Harvest Fields]

and how does that mean its unsafe ?

It doesn’t 😛😛. Are the flow and returns open under the boiler and is the pump
Spinning? Didn’t you say the pressure was constantly rising?

 

[spanner]

Waters off at the moment.
When it's back on and they're present I can carry out the rest of the investigation.
Personally the the noise coming from it is not right and I'd class it as a do not use.
Until the fault is rectified for their safety and others..

 

[spanner]

Yep flow and returns are open
Cold water isolated at the moment

 

[ShaunCorbs]

is the heat exchanger ribbed?

 

[spanner]

Ain't removed chamber cover yet

 

[spanner]

Talk about removing.
I'm not even going there.
As far as I've seen it's enough
These people should be back tomorrow.
And as far as things go
I'm not going to assist it in any way.
They can get another engineer to do what's required.
Whether a replacement or repair.

 

[ShaunCorbs]

Ain't removed chamber cover yet

how can you complete a cp12 then?

 

[spanner]

Not complete
Its tightness tested only and as far as the issue with the discharging of the prv and banging..
Or have I filled out the wrong form ..??

 

[ShaunCorbs]

are you training or fully gas safe?

 

[spanner]

Its the only form u have other than the hot water G3 sheet

 

[spanner]

Fully gas safe.

 

[ShaunCorbs]

no theres a few

Gas Safety Shop: Certificate-Pads

did you fill out a do not use form / cert and isolate it

 

[jtsplumbing]

For your information the 28i doesn't have a Plate heat exchanger, just had a similar problem with one of these found a blockage in the flexi pipe between the pump and expansion tank, & its a pig to get at

 

[spanner]

Cheers mate.
Will scroll through
So which form would you USE
For this task??

 

[ShaunCorbs]

Cheers mate.
Will scroll through
So which form would you USE
For this task??

non as its not a ar or id issue

 

[spanner]

For your information the 28i doesn't have a Plate heat exchanger, just had a similar problem with one of these found a blockage in the flexi pipe between the pump and expansion tank, & its a pig to get at

Sounds like a job in itself..
Looks ok from the outside at the moment

 

[spanner]

non as its not a ar or id issue

Well I'll add a label to do not use to cover myself.
Until I can get to understand the Go ahead the owners the goods can stay right where it is mate.
Until then.
Been here before with people trying to get one over on you
Especially when when they're over 5 or 10 year

 

[ShaunCorbs]

Well I'll add a label to do not use to cover myself.
Until I can get to understand the Go ahead the owners the goods can stay right where it is mate.
Until then.
Been here before with people trying to get one over on you
Especially when when they're over 5 or 10 year

fyi you can get brought in and put on probation from gas safe by wrongly classing fault (ar / id)

 

[spanner]

Well I never thought of that.
When Is explained to gas safe today over the access and the situation to cover myself
Was told if I'm not going to investigate it'd be a cause for concern to label it do not use.
I've said this before
When they're back I can ask more questions and get answers