Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

burner

  1. A

    Potterton Powermax HE boiler burner won't light

    Our heating has only been on twice so far since ive moved in, as far as Im aware. Both the heating and hot water lights are on, we have hot water but the burner is not lighting, so no heating. We managed to get it to come on by simply turning up the thermostat but it hasnt come on since...
    • Alex Dawson
    • Thread
    • boiler burner potterton
    • Replies: 1
    • Forum: Boiler Advice Forum
  2. C

    Heatslave burner lockout

    My mate has a Heatslave that is locking out on the burner, it doesn’t seem to lock out on heating mode just hw, though (and this may be normal ) when it has locked out on hw it cannot be reset through heating mode, that is the lock out light is not illuminated on heating, hot water has to be...
  3. J

    Identifying a multi fuel burner

    Does anyone recognise this what I believe to be a multi fuel burner from the pics enclosed, can't find no info on the unit it's self
  4. Best

    Bentone B11 burner always locking out.

    Anyone any ideas? Never had bad luck like this! At a boiler with a Bentone B11 burner that would constantly lock out after about 2hours on. Firstly, this burner is only 3 year old & in brand new condition to look at. I have checked nearly everything including the oil getting to burner, the...
  5. B

    Help with bleeding oil burner

    Hi there, I have a Worcester Greenstar Camray 12/18 Utility. I've run out of oil over night and got an oil delivery today. When pressing the red reset button, it sounded as if the boiler would come on again, but cut out after a few seconds. (I pressed the button 4 times, I hope that's not too...
  6. N

    Rothenberger burner kit

    Ive seen the "burner kit" consisting of super fire 2, bottle, 15 cutters, matt and bag adverised loads recently. I dont want the whole kit just the bag but no merchant will sell me one :bomb: Anyone know where to get one or what does everyone else use for just their whooshing gear?
  7. J

    Gas Supply for Bunson Burner

    I have been approached by a Dental Lab that would like a permanent gas supply for their Bunson burner. Not really clear on what the regulations etc are for this is it something I am allowed to do? It's a domestic size installation with just a combi boiler supplying the Lab and Dentist currently...
  8. A

    FOR SALE: Used but working Bentone burner assy for Worcester Danesmoor 15/19 boiler

    Bentone Inter B9-B oil burner assembly removed from recently decommissioned Worcester Danesmoor 15/19 oil boiler.All in good working order as far as I'm aware. Customer had it serviced about 5 months ago. Manufactured 1999. Buyer collects, or could deliver within 10 mile radius of East...
  9. D

    3 storey building CH burner upstairs lowest radiator does not work - WHY?

    It is brand new installation, CH burner on the 2nd floor, 6 radiators on the 2nd floor, 6 radiators on the 1st floor > everything worked more than fine. CH burner is of very high capacity and can provide heating to 20 such radiators. Then I just wanted one additional radiator on the ground...
  10. P

    Anyone fitted a Kiam Buckingham 8kw Log Burner?

    Hi has anyone fitted one of these , need to know whether it can be fitted on a 12mm tile contruction hearth, had ma Heta's only a month and first one ive done since passing, or the manuals would be even better? Thanks guys
  11. P

    Chmney clamp or suspending cowl for log burner

    hi there just done my hetas and am pricing up a job so any help would be allowed, am I allowed to use a suspended cowl to attach my liner to at the chimney pot or do I have to use a plate and clamp? the suspened cowl will save a lot of time and effort, also what's the difference between a...
  12. townfanjon

    log burner / gas ppe

    Cant find the answer to this anywhere, can anybody help Pal of mine just bought a new house a few weeks ago. It has a logburner already fitted, but since moving in he has seen a old capped off gas pipe underneath it. (50 mm away). We are assuming its 'live'.I obviously want to remove it...
  13. M

    Log Burner installation, Preston, lancs

    Evening lads, Just bought a house and knocking it to bits, i want to fit a log burner/multi fuel burner within the next few months. Don't no anyone so if anyone is local and wants to PM me feel free. Will give more details and my plan once spoke to someone. cheers
  14. K

    ecoflam oil burner intermittent fault

    Hi I have recently been working on an ecoflam burner which heats the cooker part of an Alpha range cooker. The cooker fires up and gets to temperature and goes through the cycle of firing up to maintain the heat but on occasions when it tries to fire up it locks out. The filter is clean and...
  15. H

    Glow Worm EP50B burner cuts out prematurely

    Hello Ladies and Gents. New on here, but have seen many posts from various members, and everybody seems helpful. So, please can somebody express an opinion on this problem. Good pilot light with new thermocouple. New boiler stat New room stat New overheat cut-off Recent 3...
  16. K

    EOBG burner training

    has anyone attended their domestic burner training ? I have just booked myself onto it for the 12th of march 1 place left if any victim wishes to join me £130 excluding vat i looked at riellos but its £150 exc vat and further to go
  17. C

    New oil burner needed

    I have a Warmflow oil boiler 60/90 fitted with a Riello Oil Burner RB1 it is 7 years old had 2 new pumps fitted over the 7 years i was a heating eng may years ago and now retired . From working with these Riello Oil Burner in the past the oil pump is not good and always gave trouble...
  18. A

    burner buffeting on common flue

    Hi, new to the forum, I have a sherborne s70c which after running for a couple of minutes starts to buffet. I say buffet for want of a better term it sounds like a whooping noise. there a three of these on a common flue and when any two are running the third can do this but it is usually the one...
  19. S

    baxi fibre burner knackered

    So been to a baxi 133 he plus with a fibre burner or rather lack of as it is ripped apart. Hex looks ok it needs new door seals and electrodes and a burner. Heres the question though coulf you put the ceramic type burner from the 80 and 100 he on this model. Now I know what everyone will say...
  20. Hobo128

    checking burner pressure on cooker.

    How can I check the burner pressure on a gas cooker, I have tried to put my manometer over the injector but it wont seal properly. Any tips please. Also should the burner pressure be the same on all rings or different?

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Back
Top