Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

burner

  1. W

    Oil condensing boiler- Burner Lockout Problem

    Hi gents, ive had a problem for sometime now with an oil condensing boiler suffering from "burner lockout" I' ve just had the boiler serviced, cleaned and checked out and took the precautions to replace some of the suspect parts. Oil filter was replaced burner nozzle was replaced Solenoid was...
  2. L

    replacement burner?

    ok oilies, whats a suitable replacement burner for a Boulter economy 50/70 (50-20.5kw) that currently has a riello443t57,(mectron style) a R40 G3 is too powerful at24kw in my mind so do i go for a rdb5070, which is slightly larger but theres b all room to fit the rdb in as it may well foul on...
    • lame plumber
    • Thread
    • burner replacement
    • Replies: 10
    • Forum: UK Plumbers Forums
  3. C

    solid fuel log burner

    Hi I'm new to this site, so hello all. I am looking at removing my gas fire and putting a solid fuel (log burner). From what I've read online some say you need building reg permission, hetas engineer . I know you need a flue, Flue liner register plate etc. I know I'll need a gas safe register...
  4. N

    Rhino oil burner HELP !!!!

    I have an external Rhino oil burner. It ran dry of oil the other week and has since been filled up. I cant find a bleed screw on the unit itself. I did however disconnect the red pipe and manually bleed it till oil came through then reconnected it . Have tried resetting it a few times but still...
  5. M

    Downrate riello t3 burner

    Hi all, I bought a riello 44t3k burner at great price and was wondering it is possible to downrate it to 15kw by exchanging the blast tube to a t1 tube with a 0.4 80 es nozzle.
  6. M

    Worcester greenstar burner?

    Hi all what type of burner is in the greenstar boilers? Zero governor??
  7. R

    Heats lave 12/14 Burner problems

    Got called to a breakdown, went through the process of isolating the problem and found the burner motor to be the problem; volt pen lights up at the connection to the wiring but the fan doesn't turn and it goes to lockout. Problem is finding the replacement motor as it's old. Parts Centre have...
  8. E

    Bleeding tube for an oil burner

    Hi we have got an Worcester Greenstar heat slave 12/18 boiler and had to recently bleed it. it was quite ***bersome and a tube with a valve, which one can turn off would make it easier. any body know where i can buy one and what it is called? i saw on on u tube but he did not say where to buy...
  9. kris

    Burner Gaskets

    Hey guys quick question for you, Burner gaskets for more modern condensing boilers , loads of my servicing nowadays is condensing and i carry a load of gaskets for different manufacturers / models, (ones i get asked obviously) and i buy in burner gaskets around 20 at a time, What do you guys...
  10. B

    Isar Idea HE24 question - display and burner LED

    Hi all i have just moved into a new flat and have a question about my he24 boiler. I gather you get a lot of these so I apologise in advance. I think I'm just being paranoid The boiler appears to be working ok, delivering hot water when I open tap, and heating the radiators when I bring the...
  11. S

    Ideal he 30 burner

    While doing an annual service on my 6 year old boiler the engineer advised me that 2 of the 3 screws at the rear of the cover of the burner had snapped due to corrosion, he then shut the boiler down leaving us with no hot water or heating. He also advised me that the whole heat exchanger unit...
  12. S

    Ferroli Optimax He Plus 38C Burner Removal

    Hi, Can anyone help me regards removal of the burner on a Ferroli Optimax HE Plus 38C, as the M.I. are nothing short than useless. After removing the fan, I expected the burner just to lift out, but with some resistance, however this burner was stuck in solid, and would not budge, after further...
  13. B

    Worcester 240 rsf - pilot ignite but not main burner

    Hi guys, got or a worcester 240 RSF not giving hw or heating on demand. When demand is put to boiler, pilot light ignites, spark electrode continues to spark even though the pilot is lit but the man burner will not ignite. Put gauge on gas valve and Gas valve not opening. Gas valve has has...
    • beesley121
    • Thread
    • burner main worcester
    • Replies: 7
    • Forum: UK Plumbers Forums
  14. S

    Burner lock out on heating only?

    I know that this makes no sense, but I have a boiler burner that only locks out when the heating is on. I know that the burner only receives power to make it fire and has now idea whether it's from hot water or heating but that is what's happening. Any ideas?
  15. brum

    Riello Burner

    Hi guys have a riello burner with oil leak, traced leak to pump adjustment screw not the nut but actual screw. Is there a repair kit for this?Boiler is coming out in a couple of months in exchange for woodburner.Its only a small leak but smells quite strong would like to help customer .Thanks.
  16. E

    What is the burner / operating pressure?

    On an new boiler, the burner pressure / operating pressure is 0 mbar, because of the zero governor, is that right? On an old boiler the burner pressure / operating pressure is what, around 14 mbar, is that right? What is the burner pressure / operating pressure on a cooker and why (can it be...
  17. W

    Vaillant VCW GB 282 EH burner problem

    Hi all, just after some advice, I've recently moved house and my new boiler is temperamental, during use the burners ignite and it burns for 30 secs or so then all goes out then relights and burns again, this continues throughout use? Obviously this makes the water temp vary and is a pain when...
  18. C

    Trianco Eurostar Burner Max 4 problems

    Hi Guys, this burner has been working great for some years, it is serviced annually. Last week the burner cut-out after running for 2 minutes. The reset light came on in the Satronic box. I reset it and it cut out again after 2 minutes. All the filters have been cleaned or replaced, the nozzle...
  19. D

    Riello Oil Burner not starting when hot

    I've had an intermittent fault with my Riello oil burner. When it turns off it won't restart. The cutout light comes on. When I press the restart it runs through the normal restart cycle but fails to relight. The pump pressure is 8 bar and I've checked flow by bleeding it so no problem there...
  20. 1

    Daikin altherma ashp wood burner solar best way to combine

    Hi All I am a newbie here! I am a sparky by trade and have been rebuilding/extending/developing our property for 3 years! (living on site in mobile home!) The building has being totally refurbished and insulated above the latest building regulations. Upvc windows and doors have been installed...

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Back
Top