Can anyone please recommend me a good quality concealed toilet cistern?
Ideally I'd like one with a 'proper' old-fashioned Pegler brass float valve and a real ballcock, but I don't think these meet water regs any more, which is presumably why no-one is supplying them. I'm very unimpressed with...
Hi
P{lease can anyone identify which manufacturer and model is shown in the photos. The flushing valve is leaking water into the bowl and suggestions for replacement will also be helpful
Thanks
Hi all
I’m posting a new thread to my first a couple of weeks ago. I’m at my wits end trying to sort a leaking high level cistern that is leaking from the base where the flush pipe connects. I have already replaced the syphon flush with a new one (Dudley) . The issue is the diameter hole size of...
Hello I wanted to fit an isolating valve to the supply to the toilet cistern so as to reduce the water pressure. The cistern has a shutoff valve with a small rubber diaphragm type shut off and if pressure is to high it keeps filling and overflows into toilet.
I have posted a photo, new copper...
Hi all. Today I attempted to fix an old leaky high level cistern that was leaking from the base of the cistern. I replaced the cistern flush (Dudley) but noticed the hole diameter on cistern was quite large compared to the inlet pipe ( circa 48 mm cistern hole vs 32 mm of inlet pipe) after...
Hi.
Wondering if anyone could help me. I've had my WC sitting like this for a year now. After having this fitted while I was at work I'd purchased a toilet with cistern and thought the flat flush Valve I'd ordered seperately would fit it but it never. So Ieft with the gap for a flat flush...
I have a couple of concealed slimline cisterns.
They have started to leak water into WC, this is 100% not down the overflow pipe, as water level is well below that.
Took it out cleaned all … still the same (or worse if anything) …. From empty the infill ‘torbeck type’ starts filling, all is...
Hi all
As the title suggests my cistern is not refilling after flushing; I noticed a fitting detached which could be the issue (see image)? Or could it be something else?
Thanks
Hi All - I’m trying to temporarily retrofit the broken ballcock mechanism for my (very) old toilet cistern (needed for 3 months before sufficient money is available to revamp the entire bathroom). The vertical inlet pip can be seen in the attached (the white pipe on the right hand side. Does...
hey guys.
A friend of mine has an old outside low level toilet and I’m wondering whether the cistern May contain asbestos. I’ve added a Picture of it to see if it helps. Cheers
Hey. Just a quick question. Are these cisterns still available today and does any1 have a link. I cant think of the make or what you call that type of cistern. Thanks in advance.
Had to take the lid off to replace the inlet diaphram, but now can't replace the lid without also messing up the two button mechanism.
This is not a 'normal' two button cistern, where the buttons can be removed individually, with this one (make unknown) the whole dual button bit unscrews so you...
Quick question please, the toilet cistern is constantly over flowing and I need to adjust the fill valve.
Am I right in assuming that the part circled should turn so that it can be adjusted? Or do I just need to bend the ball cock arm?
Thanks Phil.
Hi Everyone! My name is Steph and I have been searching hi and low for knowledge on how to open my cistern. No button plate looks like mine and I'm kinda stuck. Please help me if you recognize it!
Thank you!
Hey lads,
Trying to fix a toilet for a lady friend (to make a good impression, you know) but having a hard time. It doesn't flush, and the only it does is when I use the hose from the shower and fill up the tank with water. Once it gets to a certain point, it flushes okay, but obviously it...
I have a concealed WC cistern.
The seal between the cistern tank and siphon has started to weep ever so slightly.
Access to the cistern is very difficult.
I know the correct thing would be to remove the siphon, clean the seal landings and reassemble.
However, to this I would have to get direct...
hello,
I’m currently attempting (with very little knowledge) to renovate an old
JAPKAP toilet cistern.
I’ve so far fixed the wooden box, the lead is fine and flush arm is being re-cast.
However I’m really unsure of how to repair the flush pipe (I think that’s what it’s called) as it was...
Just fitted a new WC and all okay except I cannot get the bottom water inlet to seal. It is a Fluid master setup. It drips from between the cistern base and the plastic nut not between the nut and the thread. It came with a flat washer, have even tried 2 washers, came with a spare in case...