We recently had a repair done to a leak under our kitchen sink.
Since then we are occasionally getting a loud vibrating noise, which seems to happen when the cold water tank is filling up in the loft. Last night the noise went on for a couple of minutes. I'm guessing it's to do with the cold...
alright boys working on this hotel header tank filling with water ok but just running through and not filling to level basically telling me theres a leak cos system not filling have lifted flooring on ground floor but not traced leak must be a big leak only sections of flooring not lifted are...
Hi, I was wondering anyone could help me. I am having issues with my hot water system, my immersion heater does not seem to be filling up very quickly, literally just sounds like drips.
This has been the case ever since I changed my main water stopcock downstairs, unsure if this is related...
This one is driving me mad.
Water was dripping outside through the discharge pipe, so checked the boiler pressure guage and it was indicating 3.5 bar! Initially suspected the Pressure Reducing Valve. It was looking wet also. Pulled the cartridge out and it was in a bad shape internally. Fitted...
Hello - i am trying to repressurise the boiler as its now at zero pressure. When connecting the filling loop (which is quite short and has a braided pipe), I then turn the filling loop isolation valves to the open position, and water leaks from both taps (blue and black). There is no...
hi,
i've just carried out some minor work to my heating system and it wont fill up now .
i don't understand it usually fills up well,
yesterday and today i have been removing rads and cleaning them by hand .
last night i accidentally ran the system but i forgot to open the filter so the pump ran...
Hi, I have a Halstead Ace boiler and just a few days ago, I went to repressurise it as the pressure dial was on zero and we had not hot water or heating. Anyway, when I used to repressurise before, I would hear the water going through and I was hear the pressure up. Now, I don't even get any...
Hi all, when you fill a system its to my little knowledge, that you start downstairs rads first.
So is it best to close one side of each rad seperately, anyside if you don,t no which is the flow and return?
Then bleed the rad and then open the chosen valve, then move to the next one and do the...
Hello AllI manage 6 apartments in the same building and recent repairs to the plumbing and boilers and subsequent replacement of a boiler I noticed that these were becoming a lot more frequent and Following my inspection of the apartments I seen that the filling loop was still connected to...
Hi all,
called to look at a Vokera compact Se (2005)where there was water constantly filling from the domestic hot water over pressurising the boiler. Checked expansion vessel and ok. I can't see any divertor valve, so am I right in thinking that there is a leak in the heat exchanger between the...
Hi everyone
Im draining down an unvented stystem on the first floor, but I can't see the filling loop anywhere, or where one would attach. Surely it needs to be pressurised to 1.4bar, but how???
Hi all. Thanks for looking. I have 2 questions
1 how to fill old flue hole that does not conform to regs. Problem is its 3 floors up. Can't be reached from window. How to fill from inside!!?? If even poss.
2 gas line has to go past electric maim isolation switch before consumer unit. Only...
is it ok or even a good idea to use softened water in a central heating system? this is partially related to another post. the heat exchanger is iron, but it feeds via an indirect coil an RM stelflow unvented. will using softened water cause corrosion?
Hi Guys,
I'm experiencing a bit of an issue here:
When turning the taps on for hot water, there isn't any current / flow of water coming in and I don't know why.
It felt as if something / someone turned the tap off.
As a result, this has effected the kitchen, washing machine, dish washer...
I have got a problem with only 1 Radiator. It keeps filling up with Air and needs to be bleed. Its the radiator which is nearest to the airing cupboard. In the airing cupboard there is 2 2 port valves, pump and By pass Valve and Cylinder. Anyone got any idea's what could be causing the problem...
Hi. Can someone please tell me how to take an Ideal Standard filller/float mechanism apart please? The filler keeps lightly leaking from the top (by the arm) and also leaks into pan constantly.
The arm/float and filler is all one mechanism with the siphon to the right of it. (I would post a...
Hi, newbie here, but have been on site loads for info!!
Question, I want to move boiler filling loop from under worktop to above.WHY cos I struggle to get up and down on my knees!! Thought by having loop nearer the boiler I could check pressure easier,rather than getting up and down. Boiler...