Hi,
Would the loop in the picture (silver flexi pipe) be identified as the filling loop? My Potterton promax boiler has dropped to 1bar so just want to find out how to repressurise the system. One side of the pipework goes up to the boiler the other side to an expansion vessel. It is hot to...
Hi, I have a push flush toilet with a WDI float valve.
The last couple of days it keeps on filling into the over flow, and only cuts off after about 5 minutes.
Tonight it seems to not be stopping, and I can't work out how to adjust it so it cuts off lower than the overflow.
Is this something...
Noticed my boiler pressure was low (zero) yesterday. New house and it was ok when moved in, so presume there's a leak somewhere...
Anyway I've previously had no trouble on other boilers just turning the black taps to fill the system via the filling loop.
However, yesterday when I tried this...
Hi folks,
Just bought a new house and for the first time, have my very own boiler! However......the filling loop has a drip coming from the "in" pipe by the looks of things. From what I have read so far, it seems to be a relatively easy fix, and with my boiler service not for another 6 weeks...
My daughter has a combi boiler (Procombi 85HE) that slowly loses pressure over time. Unfortunately access to the filling loop valves is behind wooden 'boxing' which necessitates the front being unscrewed to access it. Easy for me but then I'm 50 miles away. Is there a way to have access to the...
I have an Alpha CB24 combi boiler and it's just given me the red/orange alternate flashing lights. So I've googled the problem and what I need to do is re-pressurise the system; apparently it's an easy fix.
But on my boiler, there's only one black switch and I can't make it turn. It moves...
Hey All,
Was wondering if anyone could offer some assistance, I've just moved into a new flat and now that the winters are cold enough to warrant turning the heating on I've just figured out that the radiator in the main room is not filling all the way! It doesn't get very hot at all.
I've...
Hi, anyone familiar with the Ideal Logic boilers? I've had one fitted and on the filling loop the manual shows a largish, round plastic cap and has "cap" pointing to it (see below). On mine however it's a tightened metal screw. This is for an air vent? Have they changed the design since the...
Hi All,
First of all thanks to everyone who helped with my previous questions.
Boiler:
Ideal Mini c28
In short! My boiler pressure keeps rising. So after much investigation I think it may be that the filling loop may have a leak in it so even when shut off it keeps filling the system very...
hi all thank you in advance for reading my post.
so my story starts with me finding a small leak from the radiator in the front room (carpet was soaked). i isolated the rad but the valve was letting by so bowl underneath was my option.
lucky i have a mate who is a gas engineer so he...
bigben86
Thread
back boiler
boiler
central
central heating
filling
heating
Took me a while to figure out this was actually the filling loop to the system today - constantly open inlet with a 1.5 bar pressure reducing valve and expansion vessel - never seen it done like this before :/
Hey Everyone!
I have a Lan Sanitary B228 flushing system that doesn't completely refill and instead slowly (but continuously) drains water down the bowl like I'm holding down the flush button. It will work normally and fill either seemingly randomly, or if I press the dual-flush button over...
Hi,
I have just installed a Multikwik wall hung frame with concealed cistern. Everything seems to be okay but the cistern is not refilling with water when flushed.
I've tried everything but can't figure it out. Does anyone know what it could be?
Much appreciate any help or comments!
Hi,
I have drained the central heating system to decorate. Upon refilling the boiler (headline vizo 24) water is leaking from a valve hilighted on the attached image. The water is coming from the screwdriver slot. Can anyone advise what is the purpose of this valve. I'm assuming this is not...
I've got a cistern with a Siamp Dec99bgb filling system. It started hissing and filling very slow so I fitted a replacement. However the new one is doing the same thing. I've checked the rubber seal etc,and everything seems ok. Any help please.
Hi,
I'd be very grateful for any help in trying to identify the external filling loop for my Worcester boiler. I'm waiting for the plumber but he's been delayed. I should say right now that I know virtually nothing about boilers.
The pilot light on my boiler is lit but the main light won't...
Hello,
Around 3-4 weeks ago I noticed the TPV overflow pipe at the back of the house was dripping and the system pressure had increased to 3 bar. I bled the radiators (no trapped air) and then ran off some water from a downstairs radiator. Initially this did the trick and the pressure dropped...
Si_99
Thread
filling
heating
heating system
high
pressure
system
I walked out in to my hallway earlier and noticed that the toilet was making a loud noise despite not having been flushed since the morning. On closer inspection, I found that water was pouring down into the bowl. I lifted up the cistern and the valve instantly shot out due to the high water...
Hello everybody! I rent a house with a Vaillant Ecotec pro combi boiler installed. I live in Brussels, not UK.
Last year I had low pressure up to the point the boiler stopped working and saw the F.22 message. I searched my way through the Internet and found that I had to refill the boiler using...
Hi,
I need bit of an advice about finding the filling loop in my heating system. Apologies for long description but thought to cover as much so relevant solutions can be suggested. I have spent endless hours searching internet including this forum and everywhere it is mentioned there must be...