Hi there,
I recently replaced a dead central heating pump in my home, so drained down the system completely, fitted new pump and filled up. What I'm experiencing now is a periodic bubbling noise, it starts in the hot water cylinder and makes its way to the boiler which in turn starts making...
Hi Guys,
Got a knackered Grundfos UPS 15-60 130. Have a replacement Grundfos UPS3 15-50/65 130.
Is the UPS3 pump head compatible with the UPS 15-60 body so I can just replace the pump head, or would I need to fit the UPS3 body as well?
Thanks
Hi, I am trying to replace my washers but on one tap the screw I can’t remove and the second. Removed screw but I can’t pull of the handle :/
Does anyone have Any ideas ?
Kind regards
I may have a faulty motorised valve head on a Honeywell BS864-2 22mm is it possible just to replace the head or must it be the whole fitment? Do you need to drain the tank to fit a new head on the valve?
Thanks
Ok I have been dealing with this problem for over a year and finally have to ask for some help as backflushing every 2 weeks or so is getting very tiresome.
I live in a 60's flat (3 flats per side of the block so 6 flats in all) with two overhead water tanks in a tankhouse on the flat roof for...
Hello - am hoping someone out there can offer some advice...
I've been living in a split level 1st & 2nd floor masionette for two months, which was built in the 60's.
Heating is provided via combi boiler. Water for kichen is fed straight from the mains supply (both hot and cold), however, we...
I have a pretty standard hand held shower head. The C-bracket holding it up to the mount is cracked. I searched "shower arm mount" on amazon and got plenty of hits but none of them have the adjustable flow rate feature I want.
Any recommendations?
Hi,
I've recently ripped out a full bathroom and am replacing it with new everything. The old bath was P shaped with a fixed shower head coming from the wall. I've replaced the mixer shower but the dimensions of the new shower were identical to the old so the pipework was in the correct place...
I’m hoping someone can help me. I’ve had a bathroom installed, and the whole process has been a nightmare. The plumber has now disappeared, and left things half finished. Some stuff I can sort (toilet and towel rail not actually being secured to the floor, bath not sealed around, leaking bath...
I’ve had a local church ask me to lower the cistern as it has no cold feed and no water on site to get it there. The boiler is a Powrmatic Sime and the old church warden is having to climb a 3m ladder with a watering can once a month. I went round and worked back from the tallest rad with a...
Hello All,
One of my mixer taps is dripping. Quick research tells me to replace the washer. So I prise off the top of the tap, remove a screw, then lift off the tap handle to be faced with what you see in PIC1. I am guessing I need to remove the collar with the groove ?
Can anyone please tell...
My Swan head mixer tap is dripping, I have changed the washer and still dripping. I have noticed that it doesnt drip when the dishwasher is on. Thoughts
Hi all
Please can someone help me throw some light on a problem I have and how I can resolve it?
I have changed my electric shower (Triton T80 GSI 10.5KW) from a standard handset to a Ibergrif diverter with handset and rain head. Please see pictures attached.
However upon installation the...
Hi all,
Does anyone know if you can replacement heads for this zone valve? And if so, can you replace the head only (without having to drain the heating pipes)?
Thanks
Jennie
Hi,
New person here looking for some advice. Was wondering if someone could advise me if a elbow wall shower bit connected to a hose seperate shower head can be changed to a all in one hand shower (for example Mondella WELS 3 Star 9L/Min Chrome Concerto Function Hand Shower Sets)?
This is the...
I purchased HIX 250mm Fixed Shower Head 1 month ago (here is the link to the product HIX 250mm Fixed Shower Head - Brushed Brass Finish, MP 0.5 [33250BBR] - https://tapron.co.uk/products/gold-shower-heads-33250bbr from Tapron) 1 month ago but the water pressure is very low, can someone help me...
Hi guys, my head valves of my radiators have broken teeth and need replacing. The diameter size is about 25/26 mm. The old ones are Danfoss BS6284 which are discontinued. I am aware that I could change the whole TVR cheaper but I just want to buy the heads please.
Any help would be appreciated...
I have a customer with an existing electric shower ask if they can have a dual head shower with a rainfall head as part of their bathroom upgrade. My initial thoughts were that electric showers aren’t powerful enough and we’d need to investigate what can be done from the gravity fed hot water...