Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

head

  1. R

    Aqualisa varispray concealed arm/head replacement

    Hello all, first post and in need of assistance desperately!! Im trying to remove my shower arm and struggling..... im no plumber and followed some advice and hit a snag... my shower in question is an Aqualisa white varispray, iv located the grub screw and removed it and was expecting the arm to...
  2. J

    Negative Head Shower Pump 1.5 or 2.0 bar?

    I currently have a Wickes positive head pump fitted but when trying to use shower have to run basin cold tap to keep pump running rather than on/off/on/off etc. So I'm going to fit a negative head pump ideally looking at a Grundfos Amazon/Watermill as these have inlet & outlet facing upwards...
  3. tappipe

    Grohe kitchen tap head removal mystery

    Would anyone know how to remove the two kitchen tap heads so that I can change the washers? The taps are Grohe kitchen taps There is no screw under the tap covers There are no grub screws I cannot pull the heads off of the tap using reasonable force.
  4. C

    Replacement TRV head

    Hi All, I am looking for a replacement TRV head, same brand or equivalent, as the one pictured. I can't seem to find any matching ones on Google, so would be grateful for your advice. Many thanks in advance, CB001
  5. P

    Lower pressure rainshower head vs. Handset attachment

    Hi, just had new mains pressurised heating system and boiler put in and new bathrooms. Old loft tanks gone. New floor piping in bathrooms, but older piping left in kitchen. The water coming from the rainshower heads is weaker than the handsets attached to the wall, which are at really good...
  6. C

    Shower Head Holder still on market?

    Good afternoon! Is there any chance I can still find this model of bracket slider somewhere or is it way too old? https://www.showerdoc.com/newteam-spirit-rail-bracket-slider-white-sp-280-0590-wt I broke it today and I don't want to change everything just yet. Thank you.
  7. king of pipes

    Tried and tested negative head shower pump 2 bar +

    I had a look at a job tonight new kitchen and conservatory revap everything being altered and swapped around plumbing heating ect , while i was there they asked me to have a look at the shower pump which is a few years old ? they recently had their shower room redone but the new shower doesn't...
  8. T

    Looking for adjust shower wand bar with no diverter or shower head

    I'm trying to use the standard shower pipe and a shower wand without having to install a diverter since the tile work is already done. Is there anything available like in the sketch?
  9. S

    Salamander CT60BU negative head shower pump - intermittently coming on after use

    I have just had a Salamander CT60BU negative head shower pump reinstalled after the previous same pump failed. The old pump initially after installation, would intermittently come on after use. This would occur every 10mins or so and then after time there was a period of an hour. after a week or...
  10. K

    what shower head is fast flow

    so long story short... old shower going hot and cold new shower installed new shower going and cold heat exchanger plate replaced shower still hot and cold kitchen hot tap (not a mixer staying hot) just removed the shower head on the new shower to test the water coming directly through...
  11. W

    Apron shower head for 1980s arm. Not G1/2 nor G3/4 threaded

    I need to find an apron shower head which fits an 1980s arm. The thread on the arm is either 7/8th inch or possibly 15/16th inch. It is unfortunately neither g1/2 not g3/4 thread. Can anybody give me a link to an apron shower head (my current one is 5 inch diameter) which will screw onto my...
  12. KingDoey

    Worcester Greenstar 25i head scratcher

    evening all. Called out to this boiler late last night. No HW. Pressure was down so checked expansion vessel etc and topped up. Hot water demand fires boiler which lights and then quickly reaches 97 odd degrees before shutting down. Get an initial blast of hot water through the pipes then just...
  13. CorgiDirect

    New Product Just In - Fluxuator Dual head for 15mm/22mm pipes

    This is a very popular product listed for sale on corgi direct today Best Price Online, Only £12.49 ex VAT Introducing the dual head. This version can be used to apply flux to both 15mm and 22mm copper pipe. 1 x 15mm/22mm bristle head 1 x removable brush and 1 x e75g tube of flux paste...
  14. hammers4spanner

    Scratching my head here with this.

    HAve hot water cylinder that have changed the immersion. However have changed it over still not working. Have 240v going through the element and all seems correct but still no hot water
  15. D

    Yet another 'how to remove this tap head?'

    Hi all, Bathroom basin hot water tap has slow drip. Want to replace the washer (if possible) but have no idea how to remove the knob head to get at the gubbins. It has no obvious grub screws 'round the back. Both knobs have always wobbled a bit and it only requires quarter-turn to go fully...
  16. M

    Do i have a positive or negative head?

    Hello All, I should already know the answer to this after doing some reading online, however for one reason or another im still not entirely convinced i fully understand. I just replaced my shower pump in the loft with a positive head pump, there is a ~1m drop between the water tank and the...
  17. KingDoey

    Banging my head against wall with developer

    hi all You may remember sometime ago I posted about radiator leaking a year later on new build... Well the same developer has now been on my case about flow rate. It is poor on the cold services throughout. He mistakenly got the builder to fit 20mm mdpe instead of 25mm when the place was...
  18. J

    Mixer taps with shower hose/head connection

    The hot and cold from the taps run fine but only the hot runs through the shower head. What would I need to replace to get the cold running back through the shower head?
  19. M

    Scratching my head (open vent)

    I need to tap in to the central heating due to an extension with underfloor heating that’s gone in. I want to be more than sure before tapping into the system due to its complexity and being an open vent I’m going to freeze the pipes I need to, so I can work on them. I was hoping to double check...
  20. T

    Snapped off shower head in wall

    Does anyone know how i solve this problem. I broke my shower head the other night while cleaning it. The metal has sheared off at the elbow joint in the wall which connects to the copper water feed from the valve. So i have the elbow joint still in place and secure, but it has the threaded bit...

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Back
Top