I was originally called to this as the pilot was going out.
I changed tthermocouple and then the boiler would not light the burner when the hot tap was switched on.
I suspected the diaphragm.
This was ok, but on checking the gas valve below the burner. Water had leaked into it from the...
Hi
ive built a 6m x 4m summerhouse at the end of my garden.
its a block construction with insulation and timber cladding.
I have the ufh pipework set into 65mm of screed and would like to heat the water using an electric inline heater.
Any bright ideas on which electric inline heater is best...
Hi all,
I have a customer who is looking for water heaters in a bar/ restaurant in Manchester. The building doesn't have a gas supply so the heaters need to be electric. Also, as it's a bar/ restaurant, it would more suitable to have a twin heater system in case of a breakdown.
I'm carrying...
Hi
Bath mixer tap is running too hot in shower, almost scalding.
Other taps seem mostly good temperature. However there is immersion heater in flat.
How do I differentiate whether element stat or mixer tap is failing.
Long story short friend who does installs has changed a diaphragm on one of these as it initially had luke warm water .
Had a call today saying that now it won't even start up at all and the water is stone cold.Gone over and told cust that for starters kitchen fitter has put shelf right under...
All,
In my third floor London flat, I have a water heater that is about 20 years old. The tank does not have a separate cold water storage tank.
The plumbing is complex (illustrated in the diagram below) and is displaying some anomalies.
The tank is fed from the cold mains supply via a...
Hi,
I recently bought a 2 bed flat fitted with a Elson Coral E thermal store unit, and unfortunately it's not generating any hot water from the over night immersion heater. The water isn't as cold as the cold water tap, but it's also not anywhere near lukewarm let alone hot. Also worth noting...
I'm having to use the rather old immersion heater for hot water as my DHW from the boiler has a leak.
Can anyone tell me what type of immersion heater this is? see photo. I assume it's non-thermostatic but that it does have some kind of safety cut-out? Does that mean it will heat the water...
Hi there
I wondered if you could help? I'm currently piping up the central heating for my Mum and she's already got the combi boiler a while ago which is an ideal vogue 40kw (so she is out of time to return).
We're on a very limited budget as its a big renovation which is why we're doing the...
Hi, I need to replace a clapped out immersion heater element in my hot water tank but I'm unsure as to the correct replacement size.
The current element has a length of 16 inchs overall with the actual heater element being 13inches.
any ideas as to the replacement size I should get?
Thanks in...
Hi there, I hope someone can settle this for me as I'm having something of a dispute with a client between what is a legal requirement, what constitutes best practice, and the difference between statutory / mandatory and contractual. The are looking to buy a number of Glow Warm 13.5kW units, and...