Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

heater

  1. S

    Prosource 4l Boiling Water Heater Titanium

    Boiler - Prosource Boiling Water Heater AEG GYB00416UT Product number - 945115307 Prosource - GYB00416UT Pressure Safety valve with t-piece, hose, bracket, 4 screws and tie wrap. Comes brand new in two boxes, no tap included. Installation and user manuals included. Sensible offers...
  2. jtsplumbing

    Bosch W11 LPG water heater ????

    This heater has had problems from day one ! first fitted 3 years ago, would not fire up & when it did would not maintain heat, so as under warranty Worcester get called out, 1st guy cant understand why it wont work then a 2nd chap turns up, start replacing parts, works for a couple of days so 2...
  3. A

    under sink water heater

    hi chaps, have to fit one of these tomorrow - it's a 10 litre job. Instructions are as clear as mud/ however it does say " the connection to the hot water outlet is to be carried out with a cast iron or steel sleeve or dielectric connector " I have some 1/2 inch black iron fittings - can I use...
  4. M

    Help with Sizing a Tank Water Heater

    Hi, We are trying to size a water heater with tank for a dormitory toilets, laundry and public showers. Kindly let me know what will be the best way to get about doing this? Following are the equipment that will be utilizing the water heaters, Area Equipment QTY Bar Kitchen Single Tap Sink 1...
  5. ChrisTanner

    Want to add immersion heater to Worcester Heatslave 20/25

    I have a Worcester Heatslave 20/25 in reasonable shape, and am about to install a load of solar PV on the roof. There will be excess capacity from the solar that I want to divert to an immersion heater to reduce the load on the oil boiler. I was wondering if I could fit an immersion heater coil...
  6. P

    Instant water heater regs

    Hi everyone, I was wondering if anyone knows the regulations for fitting undercounter unvented water heaters?. I'm gsr but haven't got my ticket for unvented cylinders but I'm sure I've heard that the ticket isn't required for unvented appliances under a certain size. First time I have ever...
  7. A

    Ariston Andris Lux 3kW 15Ltr Undersink Water Heater

    Hi All, I am thinking of installing one of these heaters. The online instructions says that it can be installed without an expansion tank if it is 4.2m from a cold water tap. I have a tap about 3.6m from a standard screw isolation valve. If I connect to the isolation valve the pipe work would...
  8. D

    How to determine the size needed of an electric unvented water heater to supply two ensuites

    I have a Glow worm betacom 30c combi boiler that is not connected to any water tank/cylinder in a 4 bedroom 1 bathroom house. I am adding two en-suite bathrooms which will include a shower, basin and toilet in each (saniflo systems in each). I need to identify how to determine what size unvented...
  9. J

    Tips for Main water heater service

    Hi all, I'm due to service my first Main water heater next week. I haven't taken one apart before, so I'm a bit apprehensive. The boiler is two years old, but the flame picture has a yellow tinge, so a good clean is in order. Most of it is straightforward enough - until it comes to the funny...
  10. D

    Immersion heater hot water bath

    Hi, I am looking to build a DIY hot water bath, I was planning on using a small screw plug immersion heater, drilling a hole into a polypropylene tank and using a nut/gasket to seal it. Recon it could work?
  11. J

    Britony II T gas water heater 'hunting'

    When a hot water tap is opened, everything is fine. When a shower is used, there isn't enough flow to keep the water heater happy, and after a minute or so it turns off its burner and waits for a minute while the hot water runs cold, then turns the burner back on and repeats that cycle...
  12. G

    Immersion heater/high limit stat

    Hi All How can i tell if immersion heater already fitted to cylinder has a high limit stat, important as new (plastic) CWST being fitted to replace an old rigid asbestos tank. Can post a photo of immersion heater if useful
  13. I

    Immersion Heater or Water heater

    I do not live in the UK so not always familiar with the right term. My mother has a flat in London that needs a new immersion heater to heat hot water for bathroom and kitchen.. She currently has an electric one that is very old and needs replacing. I went to B&Q, Homebase sites to look for a...
  14. Z

    Rinnai Infinity 16i gas water heater - no boiler fittings

    Hi, just purchased a Rinnai Infinity 16i gas water heater from Mr. Central Heating. Boiler and flue arrived but fittings are missing. Its got 3 x 1/2 BSP brass male connectors coming out of boiler. What's needed and where do I get it from? Gas installer advised that these should have come with...
  15. L

    Help with immersion heater

    Hi I have had problem with a 3 phase immersion heater, I installed it into a gravity system about 3 months ago and it stopped working after about a month. It was installed into an existing gravity cylinder which is on bottom floor of a large office block. The cwsc is in roof space and is the...
  16. S

    secondary return for small 15L heater?

    Hi guys , planning a job which is comming up shortly , basically need to supply hot water for 3 basins , 2 of which are far enough away that i would say need a secondary return , i have picked out a 15L unvented water heater by hyco {sf15K} , which would do the job nicely but ideally need a...
  17. L

    Installing new plinth heater 10mm pipe

    My house is fitted with 10mm pipe for whole heating system and I am putting in new kitchen so a plinth heater is the way to go. Chosen a smiths over myson as most people recommend it. Question is to join heater I need 15mm so how close should I be before upscaling pipe. The heater is bigger than...
  18. S

    Heatre Sadia multipoint water heater

    Anything wrong with this?
    • Sedgy40
    • Thread
    • heater water
    • Replies: 9
    • Forum: Bathroom Advice
  19. G

    Advice needed - Santon Premier TP210E Unvented Water Heater

    Hi, Firstly, thank you in advance for reading and any advice is greatly appreciated. I have recently purchased a flat with only electric and the hot water comes from the Santon Premier Unvented Water Heater (model number TP210E). As I am new to this I was wondering what is the most cost...
    • Gracechurch
    • Thread
    • heater unvented water
    • Replies: 14
    • Forum: Bathroom Advice
  20. J

    Is there a programmable stat that can also do immersion heater?

    Hello, Looking for help with finding a suitable controller. Customer has oil Aga for central heating and hot water - simple enough. However over the summer months it gets shut down and any heat requirements are met by wood burner and hot water is produced electrically via cylinder immersion as...

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Back
Top