Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

logic

  1. G

    replacing ideal classic with logic heat

    hi guys going to be taking out ideal classic and replacing with ideal logic heat 18. my only issue is the wiring with the pump as the classic only has the live, neutral, earth at boiler connections whereas the new logic's have the pump wiring at boiler also requiring a permanent live. was...
  2. J

    LOGIC IDEAL 30 COMBI problem!

    For two days, my combi boiler wont switch on the central heating. This is the first tine ice had any problrm in over 2 years since it was fitted. When i switch on the central heating (in the winter mode if you are familiar with this boiler) it displays "PUMP OVERRUN" and then "FAN POST PURGE"...
  3. G

    Ideal Logic + 24 Problem

    Hi guys, so quick question regarding an ideal combi... The boiler has been loosing pressure and gradually been getting worse. So last week i decided to replace the worst rad in the house and pop a can of fernox in the system whilst I was at it. Picked up a replacement PRV yesterday as I was...
  4. A

    New Logic +

    Fitted a good few of these now, great wee boiler, except for the new wiring connections!! Anyway, fitted one a month ago and the customer is complaining about the boiler still running after a demand. Been back to check it out, and the over run time is about 4 minutes, same as a few others i've...
  5. A

    logic plus, L6 fault

    Anybody come across fault on a logic plus with code L6 ...... false flame lockout? Boiler was serviced 2 weeks ago, all cleaned and good readings at the time. Fault resets and runs till next day then repeats. I have not had chance to attend yet, possibility no warranty due to being...
  6. U

    Logic 24 combi will not come out of stand by

    Hi guys, long time no see! logic 24 combi, when demand for hot water screen says 0, doesn't change to d and blue light does not come on doesn't fire! intermitantly heating does the same! suspected board, but after poking around with a wet finger it all started fine! Then died again! Now...
  7. Kewat66

    Ideal Logic 30 L2 code

    Hi All, i have an issue with Logic 30. Keeps coming up with L2 fault code. Have checked gas pressure, cleaned out condensate and still no joy. It runs through the sequence but will not fire. Anyone know of any simple or common faults on these? Thanks kewat66
  8. B

    Combi logic 35, randomly no hot water?

    Hi all recently my girlfriend moved into a flat of about 4 years old, which has the aforementioned logic combi 35 boiler in it. all was well with the boiler until the weekend when trying to take a shower at around mid morning, no hot water was being supplied, after many searchs and manuels...
    • Bitty1000
    • Thread
    • combi hot water logic water
    • Replies: 4
    • Forum: Bathroom Advice
  9. N

    Ideal logic 30 pressure problem

    Wondering if anyone can give any advice, we've had the above boiler for about 3 years now and apart from the odd pressure top up it has been fine but now we are having problems stablising the pressure. last week the hot water wasn't working so I topped it up to 1 bar - everything started...
    • neeiro
    • Thread
    • ideal ideal logic logic pressure
    • Replies: 1
    • Forum: UK Plumbers Forums
  10. S

    ideal logic 30 problem

    hi guys, i need some advice please my combo boiler is driving me mad i have had three different engineers out to look at it as it was making a loud humming noise they all reckoned they fixed it but did not, so i started searching for advice as my hot water was not heating up properly but the...
    • strangey
    • Thread
    • ideal ideal logic logic
    • Replies: 2
    • Forum: UK Plumbers Forums
  11. Scott_D

    New ideal logic

    Fitted one today Its a bit lighter It looks a bit more 'vogue' It has a vogue style user interface They have made some nice upgrades, I didn't have loads of time to play around with it but it is still s good boiler for the money.
  12. S

    ideal logic + 30 combi boiler

    Hi if someone can help I have just replaced the main pcb on this boiler everything was ok switched the boiler on via the instructions 99k pcb replaced reset turned to reset and nothing is happening they are genuine logic parts.I am not a plumber but i am a sparky.The codes match up for the chip...
    • Sparky12
    • Thread
    • boiler combi combi boiler ideal ideal logic logic
    • Replies: 7
    • Forum: Boiler Advice Forum
  13. S

    Ideal combi logic 30 - F1 code but pressure gauge is at 1.5?

    Hi, The boiler is not working and there is currently no hot water and it is not turning on..F1 message has flagged up and I have read around that this means that the pressure is low..checked the pressure gauge and it is at 1.7? I'm not sure what is happening! If the pressure gauge is okay then...
    • saraaxx
    • Thread
    • combi ideal logic pressure
    • Replies: 3
    • Forum: UK Plumbers Forums
  14. C

    Ideal logic expert advice

    Hello I have a Ideal Logic heat plus 18 about 2 years old. My work colleague bought an ideal logic heat plus 12 brand new never fitted which is now surplus and he has offered me it for free. I am thinking about keeping it for spare parts can anyone tell me what parts that wont be...
  15. K

    Ideal Logic Plus 30 - loss of pressure

    Hi , you all have probably seen this problem but as im new to this i cannot seem to find the solution. We have an Ideal Logic 30 Combi boiler 4 years old and we are having to top up using the filling loop almost every other day. My boiler engineer assures me its not the boiler at fault although...
  16. W

    Logic Heat 15 loud bangs

    Hi! I live in a rented flat with a Logic Heat 15 boiler. It's been installed for about a year, but just in the past two weeks it started acting up... making loud bangs that sound like someone's set off a firework, and often shutting itself down and displaying F2 or L2 errors. The repairs are the...
  17. C

    Ideal logic boiler question

    Hi all I have had a ideal logic plus boiler for over 2 years now and it's been perfect. I have had it serviced every year and the book has been signed and dated etc so it's all OK. The problem is that last time it was serviced the guy has forgot to reset the date on the boiler and now it's...
    • Chrisnewton
    • Thread
    • boiler ideal ideal logic logic
    • Replies: 2
    • Forum: Boiler Advice Forum
  18. C

    Ideal logic 30 combi

    Hi all I've just had this boiler fitted from a gravity fed one only problem I have is I don't have a room st at to control the heating what I would like to know is are they easy to fit and also I have been looking at the hive one can they be fitted thanks in advance
    • Chewie230960
    • Thread
    • combi ideal ideal logic logic
    • Replies: 12
    • Forum: UK Plumbers Forums
  19. M

    Ideal logic 30 - strange pressure issue

    Hi guys, i had my Ideal logic fitted just over 2 years ago and apart from a fan swap I've had no issues until now and I don't even know if this is an issue, let me explain. i know or guess that I've got a very slight leak in my piping but think it's under a floor somewhere as I've I get air in...
    • Mandlebrot
    • Thread
    • ideal ideal logic logic pressure
    • Replies: 3
    • Forum: UK Plumbers Forums
  20. G

    Ideal Logic + no hot water

    Called out today to above boiler. Heating fine but no hot water. Hall sensor is flasing red when demand for hot water but thats it. the motorised head moves fine for central heating but nothing for hot water. Could the head still be faulty if it moves for heating? any help appreciated.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Back
Top