Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

plus

  1. L

    Geberit aco 103 plus press tool advice.

    Hi. I've recently purchased a press tool which is branded geberit but it's actually a novopress aco 103. I was wondering if anyone knew if there was an adaptor that would fit so I can get the machine in tight spaces. I know Rems do a 45° attachment but not sure if this would fit in my...
  2. C

    Promax Combi HE Plus

    Hi My Pressure Gauge is giving me grief it’s rising on its own goes down to 0.8 and then rises to 1.4 bar where it currently is the heating is not currently being used and no hot water has been used for a few hours. Does the gauge need re placing.
  3. G

    Vaillant ecoTEC Plus 938 - Low Flow Rate

    Hi guys. Hope you are able to help me, and thank you in advance for anyone who can contribute. I've got a Vaillant 938 and notice that the hot water output isn't near the claimed flow. I've tested the pressure at the stopcock and it's around 3 bar. I've tested the cold flow rate from the...
  4. A

    Remeha Avanta plus 24C

    Remeha advantage plus boiler Hi Ashley here, I have an enquiry about my Remeha advanta plus 24c boiler. the remote timer/ thermostat unit has a clock that is not working can I get a new clock or a new control unit for it. what are my options ? thanks
  5. J

    Vaillant Ecotec Plus 824 F75 fault

    Hello Our Vaillant boiler has developed a fault in the last 2 weeks. The hot water is working without any problems. However, within 15-20 minutes of turning the heating on we are getting the error message 'F.75 Fault. Pump water shortage'. The boiler being on for heating is pushing the filling...
  6. M

    Ideal logic plus 30 overheating?

    Hi just wondering if anyone can shed any light on an issue i'm having with my boiler.. Initially started i think after i came back of holiday and the pressure was low on my boiler after topping up everything was fine and boiler operated as normal. A day or so after however i started noticing...
  7. G

    Vaillant ecoTEC plus 618.

    I have a become aware that the boiler seems to be cycling. I have 2 zones with a programmer in the hall and one on the landing. Once the desired temperature has been reached I have noticed on the boiler panel, that when the temp drops to about 45C the boiler fires up and then when it gets to...
  8. G

    Vaillant EcoTec Plus

    Hi Everyone. I am hoping that someone could help me with a problem I have with a Vaillant Eco Tec Plus, that was fitted last year in March. When it was first fitted I noticed that it took more than 30 minutes for our radiators, to get warm, our old boiler would heat it in about 10 minutes. I...
  9. D

    Remeha avanta plus E5

    Have a28c approx 10yrs old, vertical flue, plagued with random E5 faults. 18 months ago full service kit replacement all was good. Its now back with E5! Only thing i could find amiss was on h3 (full load) co2 8.2, adjusted back to 8.8 andas it seemed to conk out on hot water i hope thats will...
  10. J

    Vaillant Ecotec plus 824

    Hi Hope someone could help me on this. i have a Vaillant Ecotec plus 824 boiler. i have leak ( see attached picture) please some let me know what part it is and could it repairable? Thanks in advance
  11. Tommo25

    Logic plus combi 30 scalding dhw

    Hi I have a boiler to service - ideal logic plus combi 30kw. Customer says when heating has been on for a while and they he runs the hot water the water is scalding hot. Anyone have a any ideas? I was thinking maybe thermister on flow?
  12. P

    Alpha Combi Boiler Eco 2 Plus and Thermostat.

    Please can somebody tell me what the correct settings should be for my Alpha Combi Boiler Eco 2 Plus and Thermostat. Please see the attached photograph with all my current setting. Currently, my daily electricity usage seems to be higher than normal and it just was serviced. kind Regards...
    • P. R. GRANT
    • Thread
    • alpha boiler combi combi boiler plus thermostat
    • Replies: 2
    • Forum: Boiler Advice Forum
  13. R

    Vaillant EcoTEC plus system boiler - DHW control?

    Hi there, Boiler question, but nothing that contravenes gas regs. To get to the point, the Vaillant EcoTEC Plus seems to have two knobs. One has a tap symbol, the other has a radiator symbol. Even the system boiler version of this boiler has two knobs. What I cannot make out is what purpose...
  14. Hobo128

    Sabre 25he plus problems

    I think this is a vokera. Sabre 25he plus. No dhw or Ch. Switch boiler on and boiler cycles through its light sequence, pump runs on and off and diverter moves after that I get left with solid green light and solid red light. Checked over heat stat which is ok (has continuity) checked...
  15. EvilDrPorkChop

    Vaillant EcoTec Plus 615 - F32

    Was called out to this today. Earlier in the week the boiler had leaked and the guy had an emergency plumber out who proceeded to repair the leak, replace the PCB and charge the guy £900 to then tell him the boiler isn't working and needs a new fan. It did need a new fan (They wanted to charge...
  16. M

    S53 on eco tec plus

    Hi all. I am having trouble with the boiler. The boiler works absolutely fine in central heating mode but in hot water it ramps up to temp and either goes to low burn or cuts out. Shows s53 which is temp difference across flow and return too high. The plate is fine and the diverter valve? Any...
  17. Luca

    Vaillant Combi Ecotec 824 Plus Error F.61/F.62

    Hello, My Boiler keeps blocking with those error code on display I saw somewhere it should be an issue related to the mainboard.Can anyone confirm or advise on any extra checks to do?Thanks
  18. M

    Boiler plus on oil question.

    I've been asked to quote for an oil combi which I dont do very often. What do I have to do to comply with boiler plus? Is it just fit a smart programmable stat like a nest? As obviously weather comp doesnt exist for oil does it?
  19. Christopher buzzard

    Vaillant ecotec plus 624

    Hi all. Got called to the above boiler with fault code F61. Checked wiring harness from gas valve and all was ok. Reset the boiler and it worked fine. Left it running for 20 mins coming switching it on and off, it worked every time. The only thing i did notice was the display was acting up...
  20. J

    TRV's & Boiler+ (Boiler Plus)

    Evening All! I am having a thick moment. Again. What does boiler+ say about installing TRVs when swapping a boiler? I have heard some say that you (always) need to fit TRVs when swapping a boiler. Others say that you dont now don't need TRVs with the uprated Boiler+ controls. Any thoughts? J

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Back
Top