Hi all - new member home owner here
My Remeha Rematic RF room stat has a failed mechanical clock. The unit still talks to my Remeha Avanta Plus 39C - manually setting it to thermostat only mode works fine but I'd like to have it on timer again too.
As it is mechanical it has always had a...
Hi all,
I have a Vaillant Ecotec Plus 418 boiler (standard boiler, not combi), but as of this morning my heating and hot water has stopped working, and I get the error message F22.
I believe this means the pressure is low and I've looked online, and it suggest I must use valves under the...
Hello Guys,
I just recently installed a ecotec plus 825 which is working fine. The customer is complaining about their only heat source which is ufh rehau.
The problem they experiencing is no heating. I have been out and investigated the works again. I have made sure the boiler is functioning...
Only showing temp setting on right and 2 dots on left (presume they're the dots between where the time would be)
Changed batteries twice
Pressed reset and a time (11:00) very briefly displays when you first release, but then disappears.
Followed instructions to set the date-nothing
Is it...
I have a Santon Premier Plus - Unvented Hot Water System installed in my apartment and it seems the timer has stopped working. I have changed the timer which seemed to of fixed the problem but a month on the same problem is back. I currently use the 'Boost' button to heat up water.
Originally...
Fitting a bath at a customers and she asked what I thought about the new heating system she had fitted at a rental she has. A vaillant combi, 3 weeks old. I didn't think the stat fitted was compliant with boiler plus. What do you guys think.
Hi all,
Having some issues with my boiler and the central heating company are struggling to resolve.
We had it serviced and it was working fine. We then had a new filling loop fitted a week later as the old one was falling apart, and since then it makes a horrific droning /vibrating noise...
I wonder if anyone can offer a simple answer. I have a fairly newly installed EcotecPlus and a pressurised cylinder. After using some hot water for a bath, for instance, the boiler takes at least twenty minutes before waking up to replenish the hot water supply. Is there a way to make the...
I have a Vaillant TurboMax Plus 837E & it's leaking from the connection to the pump, I have attached photos. Does anyone know how to fix it?
Here are the images: Imgur
It s leaking from the copper pipe connected to the pump.
hi guys, came across my first valiant combi. I couldn't figure out how to get high fire and low fire to check my ratios and co2.
There wasn't a manual.
Any advice?
I'm used to Worcester boilers.
nice to see the big boys are opting out of boiler plus already :D
Is it OK for customers to opt-out of Boiler Plus? British Gas responds - Installer Online
As part of this boiler plus scheme, you can add 'smart controls' in order to comply.
now as i understand it, a heating system you can control from your phone is considered a smart control.
so....if you fit a hive wireless stat, along with the boiler your covered. Right?
As above, got to fit a combi for a landlord, he's supplying the boiler so it will probably be the cheapest he can find!
So what's the simplest and most cost effective way of complying with the new regs?
I'm a bit confused by these new regulations, specifically the:
Combi boiler installations must also include one of the following: Weather compensation, Load compensation, Flue Gas Heat Recovery, Smart controls.
I thought all new boilers had to be condensing for sometime now, so doesn't that...
I'm after a little advise with a Vaillant Ecotech Plus. We had a Code 75, Pressure sensor replaced, no change. Pump was vibrating every 20 seconds or so on start up, but engineer said it was faulty, new pump fitted. OK code 75 has gone. Customer has now reported the the heating is on all the...
Hi all
Need some tips. I have what is effectively a C plan system but want to split the heating into 2 zones. I have a 2 port 28mm valve on the hot water. Looking at the c plan wiring diagrams, would it work to have the zone valves off the thermostat circuits and the call for heat into the...
Just looking at the gas safe mag about the 4 choices to add for boiler plus regulations. One of the four listed is load compensation, i'm confused.. The boiler does the load compensation with room stat.. Why have they listed something that is already part of the boiler?
interested in people's thoughts- no chance that any of it is going to be done in my opinion as people are massively price conscious and the chuck it in merchants won't comply making those of us trying to do the job correctly looking even more expensive.