Evening all
My rads are quite old (30 yearsish) they are the standard single panel rads. The ones downstairs have large cold patches at the bottom when the heating is on. I want to keep them as I do not want anything deeper to block vital space and because I do not want to change the pipe...
I replaced a couple of TRVs earlier, and prior to starting I powered off the boiler (a Main Heat 15). Boiler is 7 months old, and never been isolated from the mains before today.
Once all the rads were bled, went to power on the boiler and now the pilot won't ignite. And the reset button...
Hi all,
For new affordable 2 storey 100m2 3 bedroom semi detached with air to water heat pump and system mixing valve, which should I go with:
Option 1: gravity domestic water with pumped shower (mira vigor)
Option 2: whole house / stuart turner monsoon - which model
Option 3: whole house /...
Hi guys needed some advice had to change a TRV on a radiator so drained down the system 12 rads altogether there is a unvented cylinder and heat only boiler i refilled the system again bled the air from all the radiators and air release valves by the cylinder all fine but there seem to be no...
Kamco and Norstrom Power Flush Machines From CORGI direct
VIEW HERE
Professional, Versatile and Easy to Use.
Professional Products For Professional Engineers
What's an average price not premium as in London for a standard powerflush of up to 10 rads in a domestic property? I have a chance of the kit and wondering if its worth the money
hello everyone
What level have you got to be in order to carry out power flushing have you got to be level 3 ?
And also interested in unblocking drains what is the best route to go ?
Hi all,
This is in no way a blame thread for the recent work I have had done as the guys were top notch, just looking for a bit of advice on a few puzzling questions I have since.
I had a power flush done as two of my 12 radiators were not getting hot in anyway even though the flow pipes were...
Hiya
We recently moved into a 25 year old house and all the rads were working except for the kitchen one which was stone cold as was the pipework leading to it.
We got a plumber in who fixed it but then our bathroom upstairs and small bedroom rads didn’t heat up. The plumber returned put some...
The last time this appeared here was in 2014. I intend to fit one maybe 2 to my narrow boat. Is there any more experience of these units post 2014 ?
Many thanks Rob Foster aka centralheatking
British gas done their anal service on the boiler this morning and the guy said I need a power flush which I'd guessed anyway. Quoted me £800. Obviously the British gas have astronomical overheads so how much would it be roughly from Joe Bloggs the plumber?
Hi all can you power flush a central heating system which contains plastic pipe. I have copper just under the Combi boiler then 22mm/15mm plastic pipes then copper to radiator tails many thanks
Hi,
My existing system boiler if fed via a fused connection unit off the ring final circuit, when the boiler is replaced is it a requirement/best practice, that the boiler is fed via a dedicated circuit from the consumer unit to the fused connection unit.
Cheers
Ian
Hi everyone
Got a 35cdi to look at tonight, Customer said they had a power cut and ever since the hw hasn't worked unless ch is on.
Is this likely to be a coincidence and should I be looking at the diaphragm?
Or something else?
Thanks
Hi guys!
I've just purchased a power flush pump system.
And would like some advice on what is the best fluid to use for badly clogged systems that have limescale , and where to buy it from.
Thanks in advance guys!
hi all
I’m having a new en suite fitted and a couple of weeks ago had the Homac 400 macerator fitted for the toilet waste (the plumber took the waste vertically up into loft and across bedroom to stack pipe).
The macerator worked for about a week but one day upon flushing it cut out and tripped...
Hi,
Not sure if in exactly the right forum but someone can point me in the right direction.
Have the boiler mentioned in the title. Had an issue a week ago, boiler showing as if no power reaching the boiler, but checked and power reaching boiler fine. Had previous heating engineer replace...
Not too clued up on domestic control systems, so was wanting a bit of advice,
Potterton EP2001 programmer, CH & HW
MID postion valve
Honeywell T6360 room stat
I've got no power coming into their room stat
The geezer has replaced the stat but didn't make a difference. Hence calling me.
Hot...
hey,
Set up - 3 storey house. Boiler in cellar, sealed system. Ground floor 2 pipe system, the rest of the house is 1 pipe. 2 radiators and 2 towel rails are no longer heating up. Approx 16 radiators in total.
So after fitting a new boiler, running system with cleaner in for a day. Hot...