Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

questions

  1. D

    CDI30 installation questions

    Hi All this is my first post, so please be gentle! my heating system was a glowworm boiler, set up with I think and s plan system (HW and Rad return via pump, single pipe from boiler to 2 valves for control) filled through a loft tank, into the return HW side. vented tank. main reason for...
    • Donteus
    • Thread
    • installation questions
    • Replies: 11
    • Forum: UK Plumbers Forums
  2. finchy01

    2 questions.

    1) And I'm embarrassed to ask this but, what's the simpletons way of defining pressure and flow rate. Because I have a job with poor flow rate which gets a lot worse when 2 or more outlets opened but 3bar (it's an unvented system so I was surprised at the poor flow rate) 2) I'm getting 16ltrs...
  3. Ted808

    Wiring questions... old prog? new boiler

    Hi guys... This always seems to get me and I've done the Honeywell, wiring day out, a year back or so.... So I put in a new boiler - was going for a Valliant but due to space had to go for the Glow worm Energy - heat only ... long story short... I wired it as recommended but I when I rang teci...
  4. F

    A few questions to plumbing experts

    Hello everyone, I am Peter, new here, nice to meet you all experts! My house has insulated brick cavity wall, old double glazed aluminium windows which sit on wooden frames, open vented heating system, boiler the Worchester Green star 15Ri, 8 radiators in house. 1. Recently I had 7 radiators...
  5. O

    Wanting to retrofit UFH, so many questions.

    Hi there, So the title speaks for itself. I've just purchased a 1920s build 3 bedroom detached house. Currently it has an immersion heater and no gas mains (the whole village is off the grid). It has storage heaters at the moment but the wife and I are thinking about replacing them all with...
  6. T

    Oil boiler and tank questions

    Dont know what boiler it is apart from its outside in a box! Basically I want to move the tank and wondering about how close to the boiler it can be and how close to a neighbours boundary etc and how far away from the boiler? I think the tank is a bunded one but if not would it have to be...
    • The Goose
    • Thread
    • boiler oil boiler questions tank
    • Replies: 32
    • Forum: Boiler Advice Forum
  7. W

    Few random questions.

    What does it mean when silicone sealant is described as mid modulus or high modulus? What do threads like M10 and M12 mean? Is it 10mm and 12mm? And why not imperial like other threads? Does water exit a deeper trap slower than a shallower trap? Is there any benefit to a flat wood bit over...
  8. P

    Vaillant Ecotec Bleed/Purge Program Questions

    Just a couple of quick questions about an 8 year old Ecotec Plus 831 combi (R1). Will this boiler have the bleed program function? I don't have the manual, but looked in one online and couldn't see it listed in the contents or on the filling page. If this boiler does have a bleed program...
  9. L

    low loss header questions

    right team, I have been out to a leaking 35 kw boulter camrey, knackered hex, down to acidic water from borehole in all likeleyhood, seeing as pump engineer also appeared today to replace that side of their system. So had a look round and found it was all underfloor heating dating back 20-25...
  10. U

    Thermostat wiring questions

    Hello, If a previous thermostat has been removed from a wall fixing and been made safe and plastered over, can it be dug out and reconnected? Thanks, Tom
    • Unregistered
    • Thread
    • questions thermostat wiring
    • Replies: 10
    • Forum: UK Plumbers Forums
  11. P

    Nvq level 2 questions

    Hello I'm 21 year old plumber who's completed city an guilds level 1,2,3 6129 ive been working as a self employed plumber for the last 2 years, recently I've gone to apply for a cscs card to find out I can't get the skilled worker blue jib card as I haven't got NVQ level 2, if anyone knows the...
    • Plumbjames
    • Thread
    • level questions
    • Replies: 1
    • Forum: Plumbing Courses
  12. A

    First time fitting a cold water tank tomorrow. Some questions

    Hi guys Fitting a 25 cold water tank tomorrow, taking out an old metal tank which looks as thought it is insulated with slabs of straw/hay. She had a leak in the loft last week, i went to investigate, obvious signs of water in the loft, metal tank with lots of rust inside and out. Time for a...
  13. U

    New Boiler - Pump Questions

    Hi guys, wondered if anyone would be able to help?? We are just having a new boiler etc all fitted, Plumber is fitting a sealed system (Worcester Bosch 40CDi Condensing Boiler) with a Worcester Greensome Indirect 250 litre Unvented Cylinder PLUS a 230 Litre Water Pressure Booster. Question...
    • Unregistered
    • Thread
    • boiler new boiler pump questions
    • Replies: 2
    • Forum: Boiler Advice Forum
  14. D

    Oftec Questions

    I'm currently swatting up on the oftec regs with a view to doing the ofec training and I've found a couple of things I'm unsure about. The technical book 2 says "there are varying types of flexible oil pipes available with guarantee periods between 1 and 5 years. Where the flexible oil line is...
  15. L

    2 Questions and No Idea

    Hello, Apologies in advance for incorrect plumbing terminology, twisty thingy, knobbly valve etc probably not helpful but will do my best! My bathroom sink has a mixed tap and currently only the cold water is working. A trickle may come out of the hot two when first switched on but that...
  16. E

    Gb pipe heating a small church questions.

    Hi all, looking for help, Went to look at small rural Church heating system during the week, Simi 30 Kw oil boiler feeding into a very old single pipe system running around the perimeter of the walls, approximately 6m x 18m building with about 100m of 1 in gb? no radiators. Problems...
  17. @

    Two questions about a bypass valve

    I have a central heating system with two zone valves, one for the hot water circuit and the other for the radiator circuit. I have a bypass valve installed between the flow after the pump and the return to the boiler. In case it helps, the bypass valve is a Taconova AV23 SETTER Inline with a...
  18. M

    More Questions...

    I've decided to do the Level 2 Diploma In Basic Plumbing (6035) upon completion of this course I will want to go for the NVQ Level 2 as that is what employers ask for when hiring. So here are my questions... 1. Do I have to work for or alongside a qualified plumber to get my NVQ or could I...
  19. M

    Questions about City & Guilds Certificate 6035

    On the JIB website it says "The City & Guilds 6035 Certificate is not accepted as it does not constitute the full qualification." So my question is, what would I need to do to get the Blue NVQ Level 2 CSCS Card? I'm curious what more needs to be done on top of the 6035 Diploma in order to be...
  20. B

    A Few Questions Re. Radiators, Bathroom and Kitchen!

    Hi all - new to this forum but have used and contributed to other forums for different reasons for years. So I know forums are usually great places to seek advice. Rather than post several different questions I thought I'd combine them here. I'm moving into a new house and the trouble and...
    • Birmingham
    • Thread
    • bathroom kitchen questions radiators
    • Replies: 5
    • Forum: UK Plumbers Forums

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Back
Top