The tap cover of my tap snapped so need a replacement. I can't seem to find just covers for sale so it looks like I need a new cartridge with a cover.
Would generic replacement taps on eBay work
Hi,
I have this thermostatic shower mixer but it doesn't have any branding on it.
Unfortunately it's leaking, a slow drip from the arrow on the left where I presume I would just need to get a new olive in there with some PTFE.
The bigger leak though is from the right hand side (in the...
Hi, can anyone help please? I'm trying to remove the thermostatic cartridge to check the model type to buy a replacement. Below is a photo of where I am now. I can't remove the bottom chrome cuff. I can turn it but it doesn't loosen. I think I need to remove this in order to take the cartridge...
Hi all
had some new horne 15 tmvs fitted which were set and left on 41 c but for some reason the temperature will not hold within +/- 1c. The temperature always raises up to 43-44~ after adjusting back to 41 with allen key. I have adjusted the tmv back to 41 for a few days in a row and the...
I am looking to remove thermostatic cartridge as think either clogged up with limescale or other debris as it only gets lukewarm now and never hot enough to use.
How do I remove the red button over ride so I can slip off the back plate to do the maintenance?
There are no markings to show...
Hi I am a new member.
I am looking for some advice on whether some thermostatic radiator valves have been fitted correctly.
As part of a loft conversion the plumber fitted new radiators with thermostatic valves. I expected them all to be fitted on the inlet to the radiator, but I found that...
Hi everyone
I've been asked by a customer if I can replace the current thermo cartridge on her ceda steam shower, I've found one but can't get the old one out. Any ideas?
Many thanks
Kev
Hi all,
Not been on here for sometime so hope everyone is good.
I have got to fit a Vado CEL-148C/3/SQ-C/P ( 3 way shower valve )
I will connect the left side to a rain shower head - position 1
I will connect the right side to a hand held shower head - position 3
Position 2 I want it to...
Hi all,
I've just installed a new tap / shower mixer. It the model is:
Aldo Thermostatic Deck Mounted Bath Show Mixer
Having fitted it successfully (seemingly!), it isn't working at all as expected. I should say that I'm a complete novice in these matters.
The basic problem is: the unit does...
I am having a new pressured DHW tank fitted and I asked the plumber to fit a thermostatic valve to prevent scalding at the taps.
He says that they are a waste of time as they only allow water to 42 deg which his customers find too cold for a bath.
Are there any that allow about 55 deg, and...
Can anyone tell me how to take the cover off one of these so I can adjust the temperature slightly?
Nuastyle S7435aa Thermo Mixer Valve Cp
I've tried pulling it to no avail...
thanks!
Hi all,
I need to change the thermostatic cartridge on a Hudson Reed twin control shower (its been seized shut, suspected limescale, for over a year). Apparently it is a straightforward task, though I'd like to know what happens next with this..
I took the knob off, and got this far. I suspect...
Hi all,
My customer has a two-knobbed shower (on/off, and temperature control). The temperature control has been siezed shut for about a year. I presume limescale - it's a hard water area, with limescale marks on the front of the shower.
I just looked up the price of thermostatic valves for...
I have recently put a thermostatic douche(bidet spray) for the toilet but its just letting out boiling water. The douche specification says "If the cold water fails, for example, and the hot is too high a temperature, then the valve will not let the water through" but its just doing the opposite...
Hi Guys,
new to this forum, hoping to get some help. Need to work out the make/model of this shower valve so I can replace the thermostatic cartridge. Pics attached:
Cheers for looking. Any help would be appreciated.
Hi All
Just a quickie - we have just cleared Miras stock of their recently discontinued Mira Sport Thermostatic 9.8kw white/cp showers.
Please note this is the OLD MODEL - the one that they recently revamped.
However, the price is pretty good for a Mira Sport 9.8kw thermostatic at £149 + VAT...
Hello, the Thermostatic Mixing Valve on my thermal store has gone. I would like to do a direct replacement if possible. Does anyone know who may stock a Taconova 22mm 30-70 degree C TMV in the UK. I live in York if that helps. Thanks.