Hello,
I really hope somebody can help me with this problem.
We have an Exposed Thermostatic Mixer shower, with 22mm inlet/outlet pipes, that needs replacing.
We can only find similar mixer showers made for 15mm pipes, and have been told that this is now the standard fitting. This is a real...
Hi
I have a Bristan shower which is leaking from the cold feed as it enters the thermostatic surface mounted rigid riser. It is continuously dripping and started leaking when my megaflo played up last week
I have a Valliant ecotec boiler and a megaflo tank. About 18 mths old. Last Thurs water...
Hello
Please see photos.
The shower valve was verystiff to turn on and off and for many months, the shower only got Luke warm atbest.
Tried to take it to bits overthe weekend to see if I could fix it but when trying to dismantle it havebroken the little lugs off the brown plastic collar … so...
Hi all,
I've purchased some Valves online and they've come with a brass washer I'm just wondering which side the washers go in. The washer does come apart and one side is larger than the other.
ive attached a picture if that's any help.
thanks Jessie
Somebody decided to close the my previous thread before I got a chance to answer back! I hope I didn't violate any of the forum's rules. If I did, I apologise.
But now getting back to the subject, everybody said I was wrong. Why? I did not expect to be "yelled" at in that manner. I was...
I had some guy on saying that I should be fitting TMV's on cylinder outlets to reduce hot water temperatures down to 45 degrees C on leaving the cylinder. Apparently he fits his that way! Now I have been involved in legionella prevention in commercial and industrial systems for about 20 years...
Hi all,
I'm looking for some advice with my shower.
I have a Triton thermostatic/mixer shower with a fixed shower head that is fed from a combi-boiler. The shower is about 4 years old and the combi-boiler is 3 years old.
The issue I'm having is that over the last few months the temperature...
I am thinking about replacing my standard Bath/Shower mixer with a Thermostatic one, however I am a bit put off and confused by the talk about different pressures. I live in a first floor flat with one flat above me, my bathroom cold water is fed from a communal tank on the roof which must be...
Hello Everyone,
New to the forum and looking for some advice please.
In our bathroom there is a thermostatic mixer valve under the bath. It only has a single pipe in and out which is the cold. After the valve the pipe then joins the hot water inlet for the bathroom. I adjusted the valve to...
[I posted this morning but I was unregistered - here it is again]
My shower bath has an old model of the 3 valve Bathstore thermo valve (Can't post more than one link as a new user).
The thermostatic valve is seizing up, so I thought I'd take a look inside. I removed the handle and the...
I've got a client asking about this thermostatic cartridge - Mira 5514 k 907427. Unfortunately don't have access to images. Does anybody have any idea what it is / any common code for it, I've never heard of it?
Morning Ladies and Gentlemen!
I have a tricky one here. I was on a job in Finland and need to replace the thermostatic cartridge in an Oras thermostatic shower bar. Pictures attached. Unfortunately I don't have any pics of the cartridge out of the valve, and won't be back there for quite...
Hi,
I built a house 2 years ago. Since moving in I 've had numerous issue with 2No thermostatic valves.
The first is a anti-scald valve positioned on the hot water cylinder (replaced 2 times in 2 years) and the second is the thermostatic shower bar valve (replaced the cartridge 5 times in...
Hi all I'm planning on purchasing a chrome on metal traditional thermostatic shower vlave and rigid riser kit with diverter.
eBay item number 311330660882
Which I'm using to replace a current thermostatic shower.
What im wanting to know is can I turn it around 180 degrees because my hot feed...
Alright gents.
A mate of mine wants a new shower just because of the flexi hose but I've noticed with the Mira Agile (which is what he has) is that you can get a fixed riser as well can you just buy the parts needed to swap them over? I dont know where to start.
thanks.
My new bathroom has just been installed, I was looking forward to a shower but all I can get from the shower head is cold water. Product is MIL002 from victorian plumbing. Is the shower likely to be faulty or has my plumber not installed it correctly?
Hi there, i'm new to this, i have had a thermostatic valve shower/ mixer (victorian style) fitted and although i have the power for both hot and cold when it comes to mixing them to preferred temp. no joy. Just when you think the hot water is starting to come through it continues to get hotter...
In our new house we have a thermostatic shower that the temperature control was not working properly. We could not adjust the temperate to above lukewarm. A plumber has investigated and indicated that the thermostatic value needs replacing, but cannot identify the shower (no make or model...
Hi there, newbie here trying to fix a non return valve for the shower above. I've tried to post photos but not sure it has worked. The valve has been discontinued but basically just looks like a spring and a plunger. I suspect it is the spring which has gone. Will any spring do? Can you find...
Hello,
I'm trying to replace a stuck thermostatic radiator valve on a radiator in a combi boiler system. The valve is stuck in the off position and I've closed the other valve.
I've looked at several advice pages online and a few youtube videos. I started by loosening the nut attaching the...