toilet

  1. Stigster

    Does anyone know the name of this model of Roca toilet?

    Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
  2. R

    Seal soil pipe gap/ downstairs toilet

    Hi all Just wanted to check if I can seal the gap between pipes with foam or silicone or by any other method. Thanks 😊
  3. iphone11s

    I need help finding toilet seat (URGENT)

    hi, as the title suggests i need help finding this type of toilet seat, i ordered one but completely forgot to check distance between fittings and it didn't fit. The distance between the fittings for the toilet is 260mm and its for a wall hung toilet. i can't seem to find anything similiar.
  4. B

    What is correct toilet supply line

    Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
  5. F

    Toilet, sink plungers

    Can anyone recommend a toilet, sink plunger. It’s not something I do a lot of, but it will be handy to carry on the van, for when needed. Don’t want to spend a fortune, yet I don’t want something that breaks after a few uses. Thanks in advamce Paul
  6. L

    Toilet flush pressure question

    Hello, I have a question on flush pressure. When I press the bigger button, there's hardly a flush. I understand that's normal but it's a very minimal flush. And then the smaller button is quite hard to press and I think doesn't do a full flush either. So when I flush I press both and it works...
  7. A

    Loose toilet seat!

    Hello! We have a wobbly toilet seat… it’s a back to wall toilet and whilst one fixing is secure the other is not, and it looks like the fitter didn’t really attach it all. How do I go about fixing this please! The seat in question is from Qualitex.
  8. D

    Toilet keeps blocking

    Why is this forum stopping me from making this thread when I try to explain the problem?
  9. B

    Toilet fill valve ID please

    Hello, as the title, the cistern keeps filling. The fill valve is passing, think it’s a viva skylo bottom entry with a plastic shank but there’s not markings or identification on it. Just wondering if anyone knows what type it is? I’d rather just replace the diaphragm inside if it’s one that’s...
  10. M

    Unvented cylinder D2 pipework installation to toilet waste pipe

    Hi guys, just want to get advice, i want to replace venten to unvented cylinder, is it ok to install D2 pipe to toilet waste pipe see picture? as there is no easy options to get it outside.
  11. M

    Sealing toilet to concealed cistern unit?

    With a toilet fit to a concealed cistern vanity were the front panel slides up if you need access it at later date and fitting Is it advisable to put a small bead of silicone between were the top of the pan sits against the vanity?
  12. R

    Need advice on tapping into existing toilet drain with new sewer pipe

    60's ranch, with single bathroom. Tile over concrete slab. Toilet is about a foot from exterior brick wall. Vent pipe is in interior wall behind toilet. There's a concrete patio outside the bathroom, that extends about 10 feet from the wall. I'm considering adding an ADU in the back yard, and it...
  13. U

    Loose Toilet Seat fix

    Hi Everyone Doers anyone know how to remove this toilet seat? It has no push buttons or caps that I can see and I am trying to fathom out how to tighten it! Any help appreciated!
  14. L

    Where can I get a replacement toilet seat for a bathstore euro mono back to wall pan

    I need a new seat for a Bathstore Euro mono back to wall white pan e14. The seat was a euro mono sandwich seat white chr hinge Bought in 2007. I know that bathstore went bust and homebase bought the old stock. I’ve searched online and found some replacement seats for the euro, but they don’t...
  15. T

    Toilet temperamental

    I have an old low gallonage toilet. It flushes fine when when liquid waste is present. Every time, when there solid waste in the bowl (not a lot) it clogs. I need to use a plunger each time to get the waste to flush. I made sure all the holes under the rim are clear.
  16. S

    Toilet not flushing as it did.

    We have a 1980's toilet and it normaly works by: 1.When flushed the deposit in the bowl is sucked out 2. the bowl fills up again with clean water. This is not happening now, when flushed the water fills the toilet bowl then emptys and refils. What can I do? Is it a profesional plumber callout?
  17. E

    wall hung toilet pan poor flushing question

    A few years ago I installed a wall hung toilet pan in my last house which did not flush well when disposing of waste solids. The water would rise up to the rim then dissipate and usually required further flushing to complete the disposal. I don't recall the brand but the wall mounting frame was...
  18. O

    Issue with a Cersanit toilet leaking when flushed

    Hi there. I have a Cersanit close coupled toilet which as started leaking between the cistern and the bowl when flushed. I've taken the cistern off and this is what I see. I'm assuming the issue is with the silicon gasket (please see attached photos) but can't seem to find a replacement...
  19. J

    Capping off unused toilet

    Hi! Totally inexperienced DIY newbie so bear with me for descriptions! Pictures hopefully help. I’m trying to remove an unused downstairs toilet in our new house. It’s eventually going to be moved to the other side of the house. The seal around the back of the toilet had failed so I switched...
  20. T

    Can I use push fit type tap connectors on toilet fill valve

    Hello, I have a troublesome fixed 15mm copper pipe with isolation valve going to my toilet fill valve. It's too tight for a Flexi hose. Can I use a push fit tap connector instead which will give me more flexibility in fitting?

Featured Content

Back
Top