Hi! Totally inexperienced DIY newbie so bear with me for descriptions! Pictures hopefully help.
I’m trying to remove an unused downstairs toilet in our new house. It’s eventually going to be moved to the other side of the house.
The seal around the back of the toilet had failed so I switched...
Hello,
I have a troublesome fixed 15mm copper pipe with isolation valve going to my toilet fill valve. It's too tight for a Flexi hose. Can I use a push fit tap connector instead which will give me more flexibility in fitting?
Hi, I fix what I can around the house myself and have fixed a few toilets but I need help with this one.
This toilet keeps running and stopping, running and stopping, etc. I've cleaned the rubber flapper itself and at the point that it contacts the reservoir, so I don't think it's leaking from...
Hi,
So i have lived in my house for 20+ years, (1990 build) its a detached property, corner plot with various manholes in the garden. In the last year I've noticed i can hear when my neighbor flush their toilet through my downstairs toilet - this is a relatively new thing, so am assuming its...
Hi guys
So a bit of a dilemma
Normal WC Unit height 766mm which is around the average mark.
quite alot of bogs lets say the flush pipe center from floor is 330-340ish.
However I have a comfort height Pan here and the center to the flush pipe from floor is 405MM
So we're looking 65-75mm...
Hi I need to this cast iron pipe back as my new back to wall toilet won’t fit otherwise. Cutting it back i am going to lose the collar. So what fitting can I get for it I would like a flex as it will easier for me when installing the new toilet
Hello,
My tenant toilet has just started to fill up really slow, he has said it takes 20mins to fill the tank, what could be the issue?
He provided a short video that I have attached.
Would be good to know what to look for, or what parts to take when going to take a look.
Thank you good...
I'm about to install a new American Standard Cadet 3 toilet. It's upside down about to receive the wax ring and I noticed there's a small crack in the underside of the bowl. It looks like a place where they plug an opening during casting. I've attached a photo. No sign of a crack in the inside...
I removed the tile floor in my bathroom to fit vinyl and I noticed that the loo now leaks slightly when I flush it. I haven’t put the vinyl down yet, so I can build up the floor under the loo if needed to put it back to the level it was, but maybe I can re-seat the big plastic flange slightly or...
Hi Everyone. Simple question really-Are wall hung toilet frames universal? client has one existing. So can we just replace the pan, potentially with a different manufacturer, but not necessarily. Thanks in advance.
Hi everyone,
I turned my cold water feed off in the airing cupboard which supplies only cold water to my bathroom but it also turned the water to my toilet off is that a correct set up? Because it didn't used to before the stop valve in airing cupboard only turned off the cold water supply to...
My soil pipe on the downstairs toilet seems to be partially blocked. Now I know it can be rodded but I was thinking of another way.
With the toilet removed and exposing the soil pipe I was thinking of making a reducer to fit over the 4 inch pipe down to a garden hose pipe size and then turn the...
We have recently had water hammer issues. Plumbers have installed an arrestor near our kitchen sink and a device in the toilet cistern to slow water shut off. Worked for a bit, but hammer returned. This morning, while the toilet was refilling and the shower was on, there was a loud thud that...
Hello,
I'm seeking advice on resolving the persistent blockage issues with my downstairs toilet. A year ago, I replaced an 80s close-coupled toilet with a more affordable model. This new toilet is a back-to-wall type featuring a concealed cistern within a separate unit. Since its installation...
Where to source this type of toilet seat from ?
Does anyone know where to source one of these nowadays, been advised it's about 35 years old now and was a french type one. Are the obsolete now, and only top or bottom connection fixings exist or are they source from a website possibly.? Any...
I have a RAK toilet and seat, the seat keeps coming loose on one side, I tighten the screw but it doesn't last long. My question is will a replacement screw cure the problem or will I need to get a new seat?
Sorry for asking a silly question but does anyone know how this seat comes off ? Have had advice from local plumber but even he couldn't see how to do it.
The only thing that seems possibly relevant is that each bearing point has two very small rectangular gaps, one at 8 o clock and one at 4 o...
Suddenly my downstairs toilet stopped filling this week, I suspected a blockage in the filter or cistern itself, however after removal of everything it appears that there is no water coming in, its mains fed and no sign of leak anywhere , we have checked the isolation valve and its not faulty...