Hi, I have just moved the washing machine into the garage and it will not drain.
I wonder if it's something to do with the way I have installed the waste?
The washing machine is only a month old and was working fine this morning before re-positioned.
I put an 1100mm hoorizontal run at around...
I've attempted to replace the waste plug but couldn't get the nut undone but not the sink is leaking at the waste pipe connection.
I've unscrewed the large white cover and where the pipe connects with the metal sink part it is leaking, I separate the 2 parts - would plumbers mate work or is that...
Hey guys! I'm no DIY'er but have managed to replace our kitchen sink with a bigger one from ikea. I've done everything I can and now have the main grey ikea pipe into the pipe that leaves the property. The problem is that the connection between the grey ikea pipe and white...connector part leaks...
Hi
I'm currently doing the pre-planning for my next DIY project fitting a shower tray and enclosure from scratch. I'm confident of being able to do the job but not being a plumber not sure the best way to go about it so would appreciate any advice.
The current upstairs room has a black waste...
Hi Everyone,
I recently brought a replacement Pop Up Waste from Argent K316-DL & the spec states it suits both overflow & non-overflow basins.
However it has no slotted waste opening. How could this be used with sinks with an overflow hole & still prevent sink overflow?
Thanks
Natalie
Argent...
I had a shower waste today which was supplied with the tray and wouldn't tighten up, just kept slipping threads. I've had a few of these before, they're always the ones in a white box and don't fit on the larger trays with thicker casting around the waste.
I spoke to another plumber about it...
I needed to change waste pipes because they were just crumbling into pieces, but i am not sure how can I connect the new pipe to the one inside the wall. Many thanks
Hi all, I had this installed by a plumber the other day and if I’m honest, I’m not happy really.
All in flexis when i think it could have been rigid and solvent welded . Then a dodgy installed clip at the bend.
I kinda went with it at the time but it doesn’t seem right and I’m going to call...
Hi guys, I have just installed a pop up waste on new basin.
I have siliconed the top with the washer, and the water holds inside the basin with the waste closed but when I pop it up to release the water down the drain it leaks out from the underside of the sink where the backnut nut washer are...
We have just had a drain specialist in greater Manchester who said that our builders (uncontactable) laid our 40mm pvc waste pipe from the kitchen island to outside (about 3 meters, suspended floor, just about a crawl space underneath when floor lifted) too flat and there’s standing water, smell...
Hi,
I am new to this forum and would highly appreciate if someone could provide a guidance pls.
Ours is a semi detached property with bungalow on the other side. The previous owner of our property did a 1st floor side and rear extension around 2015. The old bathroom was with saniflo system in...
Hi there
Could someone help identify the waste pipe (think that's what it is) coming from the bottom of the basin/plug hole, feeding into the other pipes?
It has a leak where it connects to the bottom of the basin, so I'm thinking about replacing it if it's a standard part.
If so can you tell...
Can the discharge and overflow pipes from a water softener go to surface water drainage (soakaway in my case) instead of foul?
I'm first of all trying to find out if they are guidelines or in Building Regs, alternatively, I can probably run some calculations to compare how much regen water will...
I’d like to replace the toilet in my house with a back to wall one. The plan is to build a panel on stud work to conceal the cistern and then use the existing soil pipe which goes out to the right.
All the back to wall toilets on Victoria Plum have a cross through the side waste which has...
When connecting a plastic metric waste pipe from a bath to a metal imperial pipe in the wall is it standard practice to use denso tape on the outside of the join? Does it stop potential leaking or movement?
Total refit of of bathroom. I've got a 40mm waste from the shower running beneath the floorboards to an external wall and out. Just above where the pipe exits is where the obvious place for the bath waste to exit as well. Should I use separate waste pipes for the bath and the shower or can the...
I have a project where we'd like to put a kitchen in the living room to create an open plan. The would mean the sink waste running the length of the kitchen circa 3m and then circa another 3m to get out to the waste stack. Most joists run the right way ( subject to any noggins) however we'd need...
Hi all,
Excuse the length but this seems like a complicated fix.
I lived in a 1930s block of flats. Brick building with concrete slab floors.
The waste stack is internal and bricked into corner of the bathroom. I noticed paint peeling and brown staining recently at the bottom near the...
Hi,
Helping a friend, his soil stack is cast iron. The bath and basin wastes (all removed now) went into individual entries on the stack. These are iron pipes, with what looks like a female internal thread into which there is some sort of metal reducer with what is maybe a compression fitting...