Is it a must to fit these valves on all new hot water cylinders? And what's the purpose of these valves just to balance the heat output between the hot water and heating?
Dannyparty92
Thread
cylinder
hot water
return
valve
waterwatercylinder
Hi,
I have a customer in Cornwall who has had someone install her hot water cylinder (Heatrae Sadia Indirect 210i Megaflo Eco Unvented cylinder I think, going there today and will check) in her stone built shed which has no insulation worth mentioning and nothing additional put around the...
HI, WAS WOUNDERING IF ANY ONE COULD HELP ME , I HAVE A LOUD HIGH PITCHED SOUND COMING FROM MY HOT WATER SUPPLY PIPE FROM THE HOT WATER CYLINDER , IT IS NOT CONSTANT ! WHEN YOU TOUCH THE PIPE YOU CAN FEEL IT VIBRATE . THIS SOUND IS HAPPENING WHEN THE TAPS ARE OF AND THE BOILER IS NOT FIRED UP...
Anybody know if part l building regs stipulate a specific given time for the recovery on hot water tanks please. Somebody today was arguing that it was 20 min or so is this correct???
Thanks
Hi all,
I've just moved in to a house that has a worcester bosch combi boiler but also has a hot water cylinder that is getting hot? Even when i turn the central heating and hot water off on the control pannel about every hour the boiler kicks in for about a minute or so to keep the water hot i...
bear p
Thread
boiler
combi
combi boiler
cylinder
hot waterwaterwatercylinder
Hi,
I'm a novice, so please bear with me, and apologies if I'm using the wrong terms or not giving enough detail.
I would really appreciate any advice on the following:
I have an electric hot water cylinder (which typically heats the hot water on the night time cheap rate electricity, and...
Craig T
Thread
cylinder
electric
hot water
tank
waterwatercylinder
I s it possible to install a tankless water heater on the outlet of a hot water cylinder feeding a thermostatic mixer shower? the tankless heater would need to be thermostatically controlled and capable of operating at low pressure. The advantage would be that the majority of the time the water...
salzar
Thread
cylinder
electric
heater
hot waterwaterwatercylinder
Hi All
I'm in the process of updating our heating/hot water system. My intention is to change the old (after market tie on jacket) uninsulated hot water cylinder for a new one and connect the gas boiler and wood burning stove boiler to it via a H2 control panel.
My question relates to what is...
I have got an Albion 210 Ltr unvented hot water cylinder and the electrician seems confused about wiring it.
There are two 3Kw Elements, one nearer the top. The House has a split Tarif meter so there is cheap night time electricity. Any advice welcome
I do maintenance work for a small letting agency and today went to a house wich was complaining about water leaking,when i got there the leak had stopped but the tenant pointed to where the water was coming from and it was the Tundish on the hot water cylinder which was coming out to fast for...
I was working at a house today and the system was back boiler with copper cylinder. Now, for some reason the cylinder didnt have a hot water stat. He said it has always been like that.
Did they used to install sysytems like this? I have never seen it before. The guy said that the water is not...
one for the veterans, I need to replace this due to corrosion has anyone got any ideas where from, its an indirect cylinder and the original manufacturers have long since gone.
Hi
I have got a combi bolier which is linked to my Gledhill cylinder. The cylinder is connected through the heating ring. However, when my heating is on full blast the cylinder overheats and the overflow starts releasing water. As I am on a water meter this is resulting in a loss of water and...
Hoping someone can answer my query - new to this forum.
Currently quoting for an unvented cylinder. No central heating in house at present - to be installed at a future date. Any problems with fitting an indirect cylinder with the central heating to be connected at a later date?
would...