Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

water tank

  1. M

    Replacing a water tank ballcock

    Hi All. I have a fast dripping overflow. Apparently the ballcock in the cold water tank is rusty and 'on it's last legs'. How easy a job is it to replace DIY or how much should I expect to pay a plumber to come out and do it? Thanks :)
  2. W

    Cold water tank overflowing after changing ballcock

    Hi peeps new to this forum and the world of plumbing. I've got a issue that two plumbers have so far failed to resolve and is driving me round the bend. I currently have a cold water tank that feeds my upstairs toilet recently it started overflowing and even though I could not find anything...
  3. W

    Airlock in mains cold water to cold water tank.

    Had a ball valve replaced on the cold water tank a couple of weeks ago. Later that day the system developed an airlock. It happens as the cold tank is refilling, and makes an awfully loud humming. Other than calling the plumber back can I fix it myself.. ? I've tried turning the water off at...
  4. I

    Leaking hot water tank from Albion Water Heaters 1200 x 450 Grade 3, 162 litre vented

    Leaking hot water tank from Albion Water Heaters 1200 x 450 Grade 3, 162 litre vented cylinder We had a new hot water tank installed 3 years ago and the leak probably started 1-2 years after installation judging by the build up of scale/residue around the leak, and the amount of water under the...
  5. P

    contact between tank thermostat and copper hot water tank

    Hi, I want to improve the thermal contact between the hot water tank and the thermostat. The old one had some sort of silvery paste. Anyone know what it is and where to get it - or can i use any high melting point grease? would the heat sink pastes for computers do the same job? cheers
  6. K

    Indirect vented cylinder - feed from mains instead of water tank. Doable?

    Hi, I am having my bathroom refurbished and had some builders in for a quotes. As part of the refurb, we want to install a mixer shower that requires at least 0.5bar. We have a standard gravity fed system (water tank in a loft) with indirect vented HW cylinder (in the airing cupboard in master...
  7. G

    Moving hot water tank from bedroom to loft

    I really want to move the large hot water cylinder from my bedroom. It takes up so much room and currently sits inan airing cupboard floor to ceiling. We considered a combi boiler but was told by British Gas because of our low water pressure, this would not suffice. I had a feeling that would...
  8. T

    Clunk Noise from Hot Water Tank Cupboard

    Hi Everyone, I'm looking for some advice as to what the loud clunking noise is that occurs when the cold water feed is activated in my house - either from a tap, toilet, washing machine, dishwasher etc. The symptoms seem to occur if the cold water has not been accessed for an hour or so. An...

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Back
Top