Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Feb 25, 2018
2
0
1
62
Cambridge
Member Type
DIY or Homeowner
Hi in need of advice please . Fitted a new grundfos pump and bled system and all rads upstairs and downstairs are working apart from the small rad in at the bottom of the stairs.i have isolated all rads and closed the lockshields and turned on boiler and all I’m getting is the return pipe at the small rad getting hot not the feedpipe ....it’s cold any ideas .
 
Turn off valves remove rad test you have water at both valves. Is the non working end a TRV?
 
Turn off valves remove rad test you have water at both valves. Is the non working end a TRV?
Hi the pipe to the trv is cold I have fired up the boiler turned the stat up and now another small rad in the downstairs loo is the same cold pipe work and yet the other big rads are working fine thanks
 
Hi in need of advice please . Fitted a new grundfos pump and bled system and all rads upstairs and downstairs are working apart from the small rad in at the bottom of the stairs.i have isolated all rads and closed the lockshields and turned on boiler and all I’m getting is the return pipe at the small rad getting hot not the feedpipe ..it’s cold any ideas .
Check To see if there is 2 flows or 2 returns has this only happened after you fitted pump could be air ? Disconect pipe that is not geting hot nock off the side that is geting hot and run the pipe into a bucket or even better a hose that is not geting hot you should see the air Hope this helps
 

Official Sponsors of Plumbers Talk

Similar plumbing topics

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.