Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Jan 10, 2017
2
0
1
I have an old heatslave boiler and the diverter valve gears have worn away. I want to replace it before I replace my boiler in the summer. Been told by local merchant that my model, A679B316-52L0 is dicountinued. I looked at another Drayton diverter valve and the connections are male not female.
Has anyone replaced just the gears on the valves and are they available? The motor gear side is fine.

Any help will will be appreciated.
 
I replaced the diverter valve today with a Drayton 679-3, I could only get the MA1 mid position actuator. Can this be wired up to use as a ZA3? If so can you give the details. There is no brown cable.
 
It would have been easier to buy the correct diverter valve

Use both the white and grey as the live
Make safe the orange wire as it will power up
Blue is neutral and green yellow is your earth

When power is applied the valve will open port A. When not powered it will spring return to port B
 
Last edited by a moderator:

Official Sponsors of Plumbers Talk

Similar plumbing topics

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.