Hi,
I'm not a plumber but just need some advice. I've installed a square shower tray in a recess. Walls on both sides. The tray is 900mm wide. I have tiled the area and now the width between the two walls is around 870mm.
Obviously there are no shower doors this size. On Victoria Plumbing it states on the descriptions on the shower doors...
'Please take note of the doors measurements - All the shower doors listed above will not fit flush to the side of the shower tray, this is to allow room for tiling or for when used with a side panel.'
Does this mean the shower door is less than 900mm and if so, what would it be as there's no info on the website and the customer service agents don't know either.
Many thanks.
I'm not a plumber but just need some advice. I've installed a square shower tray in a recess. Walls on both sides. The tray is 900mm wide. I have tiled the area and now the width between the two walls is around 870mm.
Obviously there are no shower doors this size. On Victoria Plumbing it states on the descriptions on the shower doors...
'Please take note of the doors measurements - All the shower doors listed above will not fit flush to the side of the shower tray, this is to allow room for tiling or for when used with a side panel.'
Does this mean the shower door is less than 900mm and if so, what would it be as there's no info on the website and the customer service agents don't know either.
Many thanks.