Measure for replacement shower doors

[Burger]

I need to replace some shower doors as they are falling apart and the manufacturer is no longer trading. I have fitted loads of adaptation style ones, which is usually a measure of tile to tile or tile to end finish, eg another door. However I’ve been looking at the new Mira range, but can’t get my head around how to measure, and when I spoke to Mira, they asked about the tray size.

So my wall to wall measurement is approx 705mm top and approx 720mm bottom, bi-folding door.

Anyone know what I need to be getting? I don’t want really expensive doors like cross water as I’m hopefully moving house soon,

Thanks in advance, Chris.

 

[Welder]

You will struggle for a cheap door. They only have very limited adjustment.

Look for adjustment numbers and also consider how out of square it is as you would a piece of glass. Try STAX their stuff is pretty reasonable.

 

[ShaunCorbs]

700mm

 

[Ben-gee]

Can it be a pivot door?

 

[Burger]

Can it be a pivot door?

Don’t see why not, just as long as I don’t lose too much of the opening.

 

[Ben-gee]

Look at Lakes 700 pivot door, adjust from 660-720. Really good value, not cheapo rubbish but inexpensive.

 

[Harvest Fields]

Think Wolseley do one 690-720mm but it’s about £280