Baxi 105 HE heat exchanger connection question

[Rik]

Hi All,

I've re-fitted the primary heat exchanger on a Baxi 105 HE and there is a leak from the return pipe connection. I've tried cleaning all mating surfaces and refitting using putty but to no affect. It's a push fitting of the copper pipe into the heat exchanger and is held in with a clamp, is there a better way of joining this to prevent a leak? It does not appear to have a gasket of any kind and feels loose and wobbles once pushed together.

Thanks
Rik

 

[Harvest Fields]

Are you Gas Safe Registered? If so PM @Lou your gas safe number.

 

[ShaunCorbs]

Are you Gas Safe Registered? If so PM @Lou your gas safe number.

Guess not

 

[Harvest Fields]

Guess not

Might be at work and he is going to do it later!😉

 

[ShaunCorbs]

Might be at work and he is going to do it later!😉

😀 op just asked for his thread to be deleted guess there's my answer

 

[Lou]

Thanks guys