Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Nov 27, 2021
4
0
1
Midsomer Norton
Member Type
DIY or Homeowner
Hi everyone, my sister's 5 year old Worcester Greenstar CDi Classic boiler is losing pressure rapidly[down from 1.5bar to zero overnight]. I checked everything I can think of including all visible pipework, radiators and pressure relief valve outlet and couldn't find a thing out of the ordinary. As a last resort I disconnected the condensate pipework where it has been plumbed into a sink waste pipe[ not checked if that method is permitted for an outlet but that's how it was installed] and water is coming out constantly until pressure guage shows zero. Re-pressurised and water came out again. She has only just had a service and the condensate trap was cleaned and refitted so I contacted the engineer and he wasn't interested. My question is could the leak be down to bad refitting or is a leaking heat exchanger more likely? Also, assuming the worst what would she expect to pay for a new heat exchange to be fitted? Cheers
 
Hi everyone, my sister's 5 year old Worcester Greenstar CDi Classic boiler is losing pressure rapidly[down from 1.5bar to zero overnight]. I checked everything I can think of including all visible pipework, radiators and pressure relief valve outlet and couldn't find a thing out of the ordinary. As a last resort I disconnected the condensate pipework where it has been plumbed into a sink waste pipe[ not checked if that method is permitted for an outlet but that's how it was installed] and water is coming out constantly until pressure guage shows zero. Re-pressurised and water came out again. She has only just had a service and the condensate trap was cleaned and refitted so I contacted the engineer and he wasn't interested. My question is could the leak be down to bad refitting or is a leaking heat exchanger more likely? Also, assuming the worst what would she expect to pay for a new heat exchange to be fitted? Cheers
Leaking hex.

Think Worcester Guarantee the HEX for 10 years, but you'd have to check.
 
  • Like
Reactions: ShaunCorbs
I’m sure it will need to have had an annual service each year and water quality at an acceptable level for a warranty repair.
 

Official Sponsors of Plumbers Talk

Similar plumbing topics

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.