Baxi duo tec he 28 ppm 1000

[Hobo128]

Just been out to an annual service. Stook the fga in and got 1000 ppm high co levels on the fga. Going to take the burner out and clean it along with the main heat ex tomorrow when i can get new burner seal. I know this will cure it but thought ide post somthing coz its been ages. Any thoughts ???? Also im not keen on this new version of ukpf

 

[Harvest Fields]

Just been out to an annual service. Stook the fga in and got 1000 ppm high co levels on the fga. Going to take the burner out and clean it along with the main heat ex tomorrow when i can get new burner seal. I know this will cure it but thought ide post somthing coz its been ages. Any thoughts ???? Also im not keen on this new version of ukpf

Thoughts- Don't for baxi's 😛😛 and it grows on you mate.

 

[Scott_D]

Flue split
Quite common i believe

 

[Harvest Fields]

Flue split
Quite common i believe

Not seen that before

 

[townfanjon]

Just been out to an annual service. Stook the fga in and got 1000 ppm high co levels on the fga. Going to take the burner out and clean it along with the main heat ex tomorrow when i can get new burner seal. I know this will cure it but thought ide post somthing coz its been ages. Any thoughts ???? Also im not keen on this new version of ukpf

New !! , its been like this for ages lol

 

[king of pipes]

Check the integrity of the flue a full strip down and service is needed and retest , if that does not result in a lower ppm then contact Baxi technical what was the co/co2 ratio? Cheers Kop

Dan or lou move this to the GSR only forum please

 

[Hobo128]

Thanks guys.
So as i said, took burner out and cleaned heat ex as it was full of crud, replaced gasket which is rubber not graphite then retested. Ratio was then at about 10.8 % and ppm was up 200 which was well lower than before cleaning out. Adjusted the gas valve to Mi to 8.4% +- 2 and now boiler is burner perfect. Happy days

 

[AWheating]

Don't think you need to change the seal unless damaged on these.

 

[Hobo128]

Don't think you need to change the seal unless damaged on these.

Correct but they cost £11

 

[AWheating]

11 on top of a your service price is alot when your competing on price with very cheap prices.

 

[Harvest Fields]

11 on top of a your service price is alot when your competing on price with very cheap prices.

Cheaper then not doing it and setting fire to the boiler. 😛😛😀

 

[AWheating]

The boiler set fire to itself.

 

[Harvest Fields]

The boiler set fire to itself.

The ecotec Vaillant's did when the rubber combustion seal perished

 

[London Gas]

The ecotec Vaillant's did when the rubber combustion seal perished

Went to one of these the other day, never been serviced, took the door off and didn't even recognise the thing, customer didn't even care that half the boiler had melted as he "got away with paying for servicing"

 

[Harvest Fields]

Lucky his house is not a pile of ashes

 

[London Gas]

After his wife overheard the conversation which resulted in a new boiler and how dangerous the thing was, I think he would have taken his chances and been safer 😀