baxi duo tec too high CH temperature.

[pszemek2]

Hi All.
I have a problem with baxi duo-tec 2 Combi 33GA Range with Wireless Digital Prigrammer & room Sensor. I have installed this a few days ago. everything is ok the boiler is working, there is hot water, central heating is also working. The only problem is the fact that the CH temperaure on the boiler is set at 80C and I am unable to decrease it (increasing is also impossible). When i press decrease button 51C is displayed and that's all what i get. Can someone please advise what to do in oreder to decrease the temperature on the boiler. Thank you

 

[Billy Bob Bob]

ask bod he could tell you a nightmare or 2 about the ga range,failing that call baxi in

 

[Danny25]

Met with the Baxi rep today and he basically told me not to buy a GA again. The old HE range is a good bit of kit and now comes with 7 year guarantee. Call heat team in for your boiler should be there next day, I've had so many issues with the GA range.

 

[pszemek2]

Hi Guys.
Thank you all for your replies. I just got an e-mail from baxi, explaining how to resolve my problem. I had to change the settings in wireless digital programmer. Everything is working fine now. All though I am not impressed with this boiler it is complicated and the manual guide is confusing.

 

[dancinplumba]

Wrong thread this is new members intro....that's what it sez at the top ?????

 

[Andrew_Culture]

Wrong thread this is new members intro....that's what it sez at the top ?????

It is indeed what it 'sez' but I didn't want to clog up the other parts of the forum by duplicating this information request. That would be untidy. Also this page is the top result in Google when searching for a solution to this problem so I figured that if I could eeek out the answer then this page, and therefore this lovely forum could bathe in continued reflected glory fuelled by its many wonderful members.