Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Apr 25, 2017
2
0
1
Member Type
DIY or Homeowner
I have an IDEAL icos he28 boiler and even when the programme is off, the status it always 'C'. When it's off the LED flashes and then when it fires up the LED stays on. I know from the manual that when the LED is on the boiler is working and when it's flashing the required temp has been achieved so it turns off.
My 1st question: How do I get it to reset the status to 'O' when the programme is off? (I tried the reset button, but no joy)
My 2nd question: Is this a boiler issue, a programmer issue or possibly a problem with a faulty valve?
Any help would be greatly appreciated, thanks.
 
Thanks for the responses, sorry i only saw the other thread for Cos HE24 after I'd already posted. I was able to figure out a solution to my problem from that post.
 
Hi

I had a chap out on Saturday to fix an L2 error on my boiler. Now the C status will not go off and is constantly running - not constantly heating, just whirring away. I've turned off and on, reset the control panel, and topped up the pressure to 1.5 bar. It still stays on. On resetting the panel it doesn't come on immediately, but once triggered won't go off. Please help!?
 
Last edited:
Yes, until I turn the dial on the boiler to off, then after a few mins it stops. Otherwise it stays at C even though the thermostat and control panel aren't calling for heat. The blue flame light doesn't stay on just the C and the sound of what I guess it's the pump.
 
15124017626352112710911.jpg
 

Official Sponsors of Plumbers Talk

Similar plumbing topics

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.