Both outlets from shower pump are hot.

[Scannny]

Hi,

I have installed a salamander pump for my shower. I primed both sides of the pump before turning and only got hot water even when I turned the the thermostat to cold. Checked I didn't have the feeds round the wrong and was all good. I decided to power the pump hoping the increase in pressure would solve the issue, but no luck. Both of the outlet pipes form the pump are hot, on the inlet I have hot and cold, the out let directly from the pump are hot. I have checked all the obvious thing I can think of.

22mm to both hot and cold reduces to 15 just before the shower valve.

Please help the misses is giving me grief!!

Thanks

 

[SimonG]

Hot a photo of the install?

You have got cold supply going into pump?

Checked the cold inlet filter?

 

[Scannny]

Hi Simon thanks for getting back to me.

Yes cold supply to the pump, when I primed the pump I did it without the pipework on the outlets.

Hot a photo of the install?

You have got cold supply going into pump?

Checked the cold inlet filter?