Cannon Precept gas fire manual

[jaw]

Hi

Does anyone know where i can get hold of a copy of the manual for a Cannon Precept gas fire. I've searched the internet without success. I am wanting to know the height and width openings of the fire into the builders opening.

Thanks

 

[jaw]

Whoops, meant to put height and width dimensions for the builders opening

 

[GrahamM]

Do not have an uploadable copy, but opening dimensions are 460w x 630h if fire is to be screwed to wall.

 

[jaw]

Do not have an uploadable copy, but opening dimensions are 460w x 630h if fire is to be screwed to wall.

Graham M, Thanks for the reply but I'm confused ! The fire is currently located via the fire inset at the back into the builders opening. The fire needs to be taken out and re-fitted into a family members house. When I visited the customer this morning I managed to get a rough width dimension for the fire inset (from underneath) of 305mm. Does the manual have give you any other dimensions ie for the inset part of the fire?

Thanks

 

[Mike Jackson]

In order to re-install the fire it is a legal requirement to have a copy of the installation instructions so you will need to obtain a copy. I assume you are GSR or will be using a GSR installer.

 

[jaw]

Yes Mike I am a GSR engineer. Just cant seem to find a manual anywhere on the internet. Any ideas?

 

[Barry98]

Bell the manufacturer ask then to email you a set