cast iron soil pipe

[Blackcatgas]

Use the grinder, wear a loetard, choreograph a small dance routine to the backdrop of the flying sparks, hey presto your very own 1980s "Flash Dance" reproduction but at a fraction of the cost!.
Then post the video on here.

 

[kirkgas]

What Kirk is saying here is right enough. You can cut cast with a hacksaw quicker than you could find a socket to plug a grinder in. Nobody had grinders when we were doing this stuff.

Just saw it until you get fed up sawing then skelp it with the mash hammer. It will break clean enough.
I was always a 4lb man myself🙂

You can't do this if you are cutting into a pipe. You will need a chain cutter or a grinder or a lot of patience and big arms

i knew you would back me up old man haha, 4lb hammer!!!!!!!! big tough boy you