I originally started this thread to try and find out just how I was supposed to connect a standard 32mm push fit waste pipe to a Victoria Plum trap where the outlet was too small to take the pipe. All the replies have been very interesting but none of them answered my question. Does anybody have the answer please.
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
- Thread starter Vicdiy
- Start date
- May 23, 2015
- 35,144
- 1
- 14,996
- 113
- Member Type
- Heating Engineer (Has GSR)
The answer is above back to suppliers for an adapter if they don't do one change the trap for a uk one
I changed the trap for a uk one but then had to change the waste also as the new trap wouldn't tighten on to it. I later found out I could have used a McAlpine EU to UK adaptor to connect the UK trap to the VP waste outlet. I still don't know how VP expect you to connect a 32mm standard waste pipe to their trap which has an outlet which is too small to take it.
Official Sponsors of Plumbers Talk
Similar plumbing topics
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.