Guest viewing limit reached
  • You have reached the maximum number of guest views allowed
  • Please register below to remove this limitation

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Connection to Boss Pipe Leaking

View the thread, titled "Connection to Boss Pipe Leaking" which is posted in UK Plumbers Forums on UK Plumbers Forums.

Hi all, hoping you can help me.

I have a leak where the bath waste pipe connects to the boss pipe. Not sure if its a push fit or pipe weld type. In the pic, it's the lower of the 2 pipes coming from the left. What's the best solution for this please? I'd best tell you that I'm not particularly good at DIY, but am a tryer.
 

Attachments

  • Screenshot.png
    Screenshot.png
    522.6 KB · Views: 70
Last edited:
Should be a rubber bung as it’s pushfit pipe you can’t solvent weld but I’m not saying someone just hasn’t siliconed the pipe in there etc
 
Pipes at wrong angle putting stress on bottom of rubber oring. This has caused it to deteriorate and leak.

You’ll likely be able to pull it all apart.

I’d shorten the closest vertical pipe by around 10mm.

Then replace the oring.
 

Official Sponsors of Plumbers Talk

Reply to the thread, titled "Connection to Boss Pipe Leaking" which is posted in UK Plumbers Forums on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Thread statistics

Created
joben1,
Last reply from
rpm,
Replies
12
Views
2,055
Back
Top