Drain Rods - Which are Best?

[JohnnyTooSharp]

Hi everyone, I've had rods break and come apart before and I can't go losing them up a customers drain, so recommendations please......

Which drain rods do you recommend, for a tradesmen, not a DIY set?

And/or how can I tell a good set from bad?

 

[JohnnyTooSharp]

Any suggestions or advice ?

 

[snowhead]

The best, unbreakable (subject to use) are Steelkane, as used by the drain pro's.

Steelkane Rods and Accessories

Wardsflex Steelkane rods manufactured from high tensile steel are the quickest and easiest way to clean or clear drains and sewers Features - Easy

www.tankerspares.co.uk

 

[JohnnyTooSharp]

Bailey? Rothenburg? Anyone!?

 

[JohnnyTooSharp]

The best, unbreakable (subject to use) are Steelkane, as used by the drain pro's.

Steelkane Rods and Accessories

Wardsflex Steelkane rods manufactured from high tensile steel are the quickest and easiest way to clean or clear drains and sewers Features - Easy

www.tankerspares.co.uk

I've had a gander, look awesome, for regular drain rodding, any idea what diameter I should get? There's about 3-4 options!

 

[snowhead]

On the Steelkane website link below,

5mm rods for 50 to 75 mm
6mm rods for 75 to 150mm

Drain Cleaning and Rods - Rods & Accessories - Steelkane Rods and Accessories - 5mm Steelkane Rods - Page 1 - Wardsflex

www.wardsflex.co.uk

 

[PETE 123]

Steelkane are best i worked for dyno rod and they used them the thicker ones ane more solid but the thinner ones go round bends better dont bother with cheap ones as when on dyno rod had to get quiet a few out of drains that owners lost or broke.

 

[Ben-gee]

I would say for the occasional use a ‘normal plumber’ needs a standard screw together set ( or two) is all that’s required.
If you inspect the ferrule/rod interface as you put them together and ensure you operate them with a twisting action so that they don’t unscrew during use they will serve you well for years.
I have two sets for extra length when needed ( plus borrowing an extra set from a mate as well one occasion).
I have chucked a couple of rods when the rod cracked near the ferrule, but I’ve never lost a rod or had them come undone.
The only thing I might do is get a thin set for extra flexibility when you come across a deep narrow chamber, ie a modern plastic one instead of a good old brick job.