ferroil f30 flow sansor

[archiedale]

called to NO dhw unless heating is on, found flow sensor had melted internals... can someone tell me how this happens ?

 

[moogwai]

Just a ferroli being a ferroli.

Sent from my GT-I9100 using Tapatalk 2

 

[diamondgas]

called to NO dhw unless heating is on, found flow sensor had melted internals... can someone tell me how this happens ?

If it's a 240v microswitch eventually they start arching!!! That generates heat and chattering usually 🙂 Eventually everything fuses together 🙂 That'd be my take anyways 🙂

 

[archiedale]

sorry sensor... 3/10... see me after school

 

[archiedale]

thanks by the way

 

[diamondgas]

Would that be a temp sensor not actual water flow ? If so I'd imagine it 's corrosion? 2nd guess any closer 🙂

 

[archiedale]

no diamond, flow swithch/sensor

 

[diamondgas]

no diamond, flow swithch/sensor

🙂 Okay so you're talking about the hot water flow sensor. Downloaded the mi's to get on the same page archiedale 🙂. Never seen one in my life but notice that is has 3 wires and is on the 24v side of the PCB. So how does this fella detect the flow of water I wonder, I'm intrigued 🙂 As far as it melting, I revert back to my first guess at arching going on inside, maybe due to water perhaps or dirty switch conections if it turns out to be a microswitch inside 🙂