Freebie alert - Aladdin Easifit Emergency Isolator & toolkit - Sponsored thread.

[Ray Stafford]

Please see this youtube video for a demonstration of the Aladdin Easifit isolator, or visit their website here.

Its a 15mm lever valve that you can fit to a live pipe, without draining, freezing, bunging or soaking yourself in water. Ideal for namby-pamby plumbers who don't fancy doing a cold mains live, or cutting into a murky heating pipe over a white carpet. 🙂

It fits 15mm copper, Hep, Polyplumb, speedfit etc, and leaves you with a permanent full-bore lever valve in place.

At just under £30 + vat they aren't cheap - but on the other hand, neither is hours of labour draining and refilling, and freezing isn't always feasible particularly if there is any flow. We are including the toolkit in the freebie.

I have 5 to give away for review. The first 1 goes to Rodolphe for drawing my attention to it at Phex, and the 2nd goes to Bod - I can't remember why, but I have a note that Bod deserves one for some reason. The other three will go to the first three plumbers arms members who PM me their postal address.* Other members - sorry, but if you are a professional plumber, build a good post-count, and apply to get into the arms!

A big thanks to John at NLB Engineering for providing the freebies.

As always, its a condition of the freebie that you promise to come back on the site and post a review. There is a sticky thread for the purpose. The review does not have to be positive, but if you have criticisms please keep them polite and constructive! Sensible feedback (even if its negative) encourages manufacturers to provide the freebies to keep these giveaways going.

Cheers

Ray

*Members ineligible for freebies until they review the Calshot or IntaKlean freebies are: APPlumbing, Croppie, kay-jay, Mike Jackson, JCPLumb, Anz, Stani, Redsaw, Orry Clayton, Destroyer2813, Stevetheplumber.

 

[Ray Stafford]

First of the three goes to lbp plg & htg!

Two left...

 

[Ray Stafford]

And they're gone.

Nickelarsed and NPK get the last two.

 

[PlumbBobBob]

didn't see the last post when i pmd you lol

 

[mountainman]

Aw! Rats, I didn't see the thread. 🙁

 

[Rickster123]

Don't suppose you've got a stash of diarys left over ray have you???

 

[Barry98]

PLEASE support these freebies by putting your reviews here

http://www.ukplumbersforums.co.uk/g.../45172-williams-co-product-review-thread.html

thanks ray I look forward to mine and will report back accordingly

 

[Ray Stafford]

Don't suppose you've got a stash of diarys left over ray have you???

We are too mean to do giveaway diaries.

I wish I had known you wanted one, because I turned down several from various suppliers (I over-rely on iPad/phone!)

Sorry AP.

 

[Rickster123]

No probs ray. I usually get them each year but not this year and I'm too mean to buy one!

 

[Howsie]

No probs ray. I usually get them each year but not this year and I'm too mean to buy one!

I have one from my electrical supplier you can have.

 

[Rickster123]

Cheers mate!

 

[Dannypipe]

I bought one of these today, for a job I've got to do over the weekend, which can't have any down time on the supply and can't be frozen. Not cheap but what a brilliant idea.

 

[Ray Stafford]

I bought one of these today, for a job I've got to do over the weekend, which can't have any down time on the supply and can't be frozen. Not cheap but what a brilliant idea.

Let us know how it goes Dannypipe.

 

[Keefy]

I bought one of these today, for a job I've got to do over the weekend, which can't have any down time on the supply and can't be frozen. Not cheap but what a brilliant idea.

Soft lad, I could have sent you my one if you'd asked nicely! Saying that though I'd probably need it the next day. Let us know how it goes. 😉

 

[Dannypipe]

That's really kind of you but keep it in the van for an emergency mate.

I wish I had come up with the idea. Genius. I'm looking forward to trying it. If it all goes well, I'll be keeping one on board for emergencies. They need to start making them in 22mm and then they need to put the price down a bit!

 

[Dannypipe]

Let us know how it goes Dannypipe.

Will do. I've taken it all out the bag and watched the videos close to get my head around it. Looks simple enough to fit.

 

[Keefy]

That's really kind of you but keep it in the van for an emergency mate.

I wish I had come up with the idea. Genius. I'm looking forward to trying it. If it all goes well, I'll be keeping one on board for emergencies. They need to start making them in 22mm and then they need to put the price down a bit!

Make sure you check out the demo videos on YouTube, and let us know if you can get it done in under 2 minutes.

Edit: Ignore this, didn't see that post lol.

 

[Ray Stafford]

They need to start making them in 22mm

True

and then they need to put the price down a bit!

Nah. Cheap as chips. 🙂

 

[Keefy]

Dannypipe - did you buy a fitting kit too?

 

[Dannypipe]

It came with the fitting kit for £30 plus VAT.

 

[smtplumbing]

why cant it be frozen dannypipe, let us no how you get on i was thinking if you had a burst pipe and the mains running full boar could this be fitted if toby cant be found

 

[Dannypipe]

If there was an option to have it cheaper without the fitting kit, I probably would have gone for it, as I have all the components on board anyway. Only thing is there is a red alignment line on the socket they give you in the kit so that you know you've gone to the right depth.

 

[Keefy]

It came with the fitting kit for £30 plus VAT.

That's a good price then. I'm looking in the Corgi Direct catalogue now and they're selling the valve for £30.00 and the tool kit for £6.00 seperately.

 

[Ray Stafford]

That's a good price then. I'm looking in the Corgi Direct catalogue now and they're selling the valve for £30.00 and the tool kit for £6.00 seperately.

Must have gone to a decent merchant 😉

 

[Dannypipe]

why cant it be frozen dannypipe, let us no how you get on i was thinking if you had a burst pipe and the mains running full boar could this be fitted if toby cant be found

It can't be frozen because the stopcock is broken, and the problem outlet is leaking (a fast drip). So even with my powerful freezing machine, I wouldn't like to bank on it freezing a solid slug in the pipe work. As we all know, running water doesn't freeze well!

I started talking about trying to tape up the outlet with almagamating tape, and freezing it, when I remembered the valve, and the customer said, just do that. It's take 15 mins for the machine to freeze a 15mm pipe even if it isn't leaking. So time against costs. This works out much the muchness!

Looking at the video, I reckon I could fit one of these in about 2 mins or less...but I may eat my words.